With new drivers and updates
1. AGC active (Previous value was zero)
2. 0 (zero) button clears zap history and zaps to channel # 1 (Previous action was zapping to previous channel)
With new drivers and updates
1. AGC active (Previous value was zero)
2. 0 (zero) button clears zap history and zaps to channel # 1 (Previous action was zapping to previous channel)
Last edited by girginoz; 14-08-13 at 08:57.
[COLOR="#0000FF"]Octagon sf8008 single/COLOR] 1.5m motorized dish 95E-30W
you can change the action of the 0 button to either act as a panic button ( clears all viewing history and zaps to ch1 in the first bouquet ) or zaps to the last viewed channel.
Menu> Setup> System> Channel selection settings> Enable panic button = yes or no as needed.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
I disabled panic button and went to 28.2E. Watched CNN for some time and unplugged.
When plugged in it started with channel #1 at turksat
(Checked but there is no log for this)
[COLOR="#0000FF"]Octagon sf8008 single/COLOR] 1.5m motorized dish 95E-30W
The panic button has nothing to do with the startup service, what channel do you have set as the start up service ?.
you can manually set any channel of your choice as a start up service by pressing up on the dpad of your remote then menu on the channel of your choice and select the set as start up service option.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
girginoz (14-08-13)
I do not use any startup service. Prefer to start where i left but this problem is permanent with gb800se.
This might be the log. Sorry for the time stamp.(transponder time)
Code:Attachment 27999
Last edited by girginoz; 14-08-13 at 10:31.
[COLOR="#0000FF"]Octagon sf8008 single/COLOR] 1.5m motorized dish 95E-30W
Timestamp of log is 14 Aug 2013 11:51:22 EEST
[COLOR="#0000FF"]Octagon sf8008 single/COLOR] 1.5m motorized dish 95E-30W
You can set the power button on the remote to allow it to go to deep standby with one press, check/unplug other rooms. By the time you get back box will be in deep standby.
Tapatalker
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
girginoz (14-08-13)
Why do people bother with this?! So you turn your microwave, oven, radios, internet connection, and anything else that "you don't use at night" off at the plug? I'd guess unlikely. But with the box on deep standby, it uses less than 1 watt. This means, that it costs less than £1 a year to run... plus, you can set timers tip run at night and get the box to record then for you out of deep standby...
Sent from my GT-I9300 using Tapatalk 2