I have done this 10 times to date and still the same results. as the first post states something is missing.I think you need to take a deep breath!
Assuming that you managed to update the bootloader.
Click on quick support links -> OpenVix Downloads -> ET5000 and download latest.
This is a zipped bunch of folders that shouldbe unzipped and copies to a USB stic, there is no boot file.
Power off the ET5000 and then holding the up button power on the ET5000.
Assuming you have some lights on the stick you should see the ET5000 reading the files.
WAIT! It takes a few minutes to load and then execute.
Ifyou are not sureabout the bootloader it can be found at thebottom of OpenVix Download folders
I have updated my ET5000 quite a few times recently and you need patience because the lights don,t tell you a lot.... And power on with the up button held and the USB stick in thefront position.
Thanks John
See if you can ftp into box using filezilla and see if you can get a debug log, if you can post on here.
Also make sure you have done everything to the letter in the guide above
Vu+ Duo
Vu+ Solo
Gigablue HD 800 SE
All with latest vix image - Autobouquets - SgtFlipflop 28.2e Picons - WebradioFS
Welcome to Satellite Support Forum .: Home of OpenViX Team:.!
World-of-Satellite enthusiasts Satellite, IPTV, Technology, Audio visual Forum.
Any information provided on this site is not guaranteed in any way. Some articles may discuss topics that are illegal, so this information is provided for educational purposes only, your use of the content, downloads and files, or any part thereof, is made solely at your own risk and responsibility. Viewing Pay TV without a valid subscription is illegal. !! World-of-Satellite.com cannot be held responsible for the content of any information stored or posted on this forum.