[SOLVED] Uno tunner problems

**lampiao** · 15-07-11, 10:37

Originally Posted by pooface

No, I am saying to take the feed that goes in to the duo (i.e. the cable), and put it in to the uno. It might be that the cable or the lnb itself is faulty... Never said anything about the tuners? The tuners on the duo are not interchangeable like those on the uno, so you wouldn't be able to do that anyway...

haaa. ok, I have tried that allready. no luck...

**Sicilian** · 15-07-11, 14:16

No problems here, just checked the two channels that the OP mention in the thread earlier, benfica tv and sport tv liga inglesa. See screenshots attached

**Sicilian** · 15-07-11, 14:17

Here's the infobar's too

**lampiao** · 15-07-11, 14:39

well, first thing that pops up to my eye is the image in use... all I have tried fail so far.
Can you please point me in the wright direction to get that image and advise on the drivers used.
or maybe if I just change the modules.
also what is your setup. lbn in particular, not that should matter as al diferent HD boxes in the house are working perfect.. even when it rains a lot no signal loss.

**Larry-G** · 15-07-11, 14:41

the image used is the VIX image which at present has not been released for the Uno ( coming very shortly ).

**lampiao** · 15-07-11, 14:43

Originally Posted by pheonix

the image used is the VIX image which at present has not been released for the Uno ( coming very shortly ).

I know that.. I could see that.. I have no personal interest on any image in particular, but just for my use is it possible to have the same image for testing porpuses?
Well i just want this bloody boxes working...

**pooface** · 15-07-11, 14:44

Originally Posted by lampiao

I know that.. I could see that.. I have no personal interest on any image in particular, but just for my use is it possible to have the same image for testing porpuses?
Well i just want this bloody boxes working...

The image will be released soon ... you are welcome to test whether it fixes your problem when it is released...

I can't imagine tho, that the image would be the cause of your problem... Are you sure you have updated the satellites.xml file? As this is quite often the cause of problems for users with similar issues to yours...

**lampiao** · 15-07-11, 14:45

or at least some imformation about what original version is the image based on, what OE

**pooface** · 15-07-11, 14:46

Originally Posted by lampiao

or at least some imformation about what original version is the image based on, what OE

It's based on the same image as all others... If you'd read the release notes of other ViX images, then you'd know

Also, read the amendments I made to my post in the mean time after I posted and after you'd posted...

**Sicilian** · 15-07-11, 14:51

Using a Technomate 80cm dish with a Technomate 0.1db Gold LNB.

Using same drivers as in the current ViX image.

Personally if I where you I'd save your settings/bouquets from your Duo and transfer them to the Uno.

Also check you tuner setup compared to the Duo.

**lampiao** · 15-07-11, 14:59

"Using same drivers as in the current ViX image." what current image? is there any vix image for uno? or you mean current image for other VU ?

**Sicilian** · 15-07-11, 15:03

Originally Posted by lampiao

"Using same drivers as in the current ViX image." what current image? is there any vix image for uno? or you mean current image for other VU ?

The current public image's for the VU+.

**Larry-G** · 15-07-11, 15:05

the newest drivers for the Uno released today

Code:

http://www.world-of-satellite.com/showthread.php?9627-Vu-New-Drivers-15-07-2011-%28Uno%29&p=71150#post71150

**lampiao** · 15-07-11, 16:56

well, no luck here...
new drives did not make any diference.
I just checked my lnbs again and they are 0.2, I supose the next step is to try new lnb.
having said that why it works perfect in all boxes, vu duo, solo, spiderbox, dm8000, dm800 and this UNO... I am starting to think this is "ultimo" and not number "uno"...(ultimo in portuguese=last)

**lampiao** · 17-07-11, 00:36

here I am again.
I have not been able to resolve this problem.
I just installed two new images, one in UNO, one in DUO, and made two logs with both of them from boot to channel scan...all conditions where exactly the same, same sat.xml also, same antena, etc.
for the ones who may have some interest on this and if you want to find where problems start faster, just use search document and look for this header:
prepare_sat System 1 Freq 12052000 Pol 0 SR 30000000 INV

regards

Thread: [SOLVED] Uno tunner problems

Thread Tools

Display

The Following User Says Thank You to lampiao For This Useful Post:

The Following 2 Users Say Thank You to Sicilian For This Useful Post:

The Following 2 Users Say Thank You to Sicilian For This Useful Post:

The Following User Says Thank You to Larry-G For This Useful Post:

The Following User Says Thank You to pooface For This Useful Post:

The Following User Says Thank You to pooface For This Useful Post:

The Following User Says Thank You to Sicilian For This Useful Post:

The Following User Says Thank You to Sicilian For This Useful Post:

The Following User Says Thank You to Larry-G For This Useful Post:

Logs

Tags for this Thread

Posting Permissions

Options

About

Site Links

Social Media