Freezing and mosaicing

[Sicilian]

Have you set speed for the card reader?

BOXKEY: /dev/sci0 XX XX XX XX
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3580000

[canthackit]

if i'm going to try oscam i'm going to need a really got tut, and a lot of your help

but atm everything i've tried has not worked, everything makes no difference i'm still getting at best ecm times of 246 ms.

regards: canthackit

[Donnie]

I have never tried one of these box's but don't you have a smargo Hackit ?
I am sure the rest of the guys here know if smargos work with this box.

[canthackit]

i used to overclock to 6.8Mhz this was on the Duo never had a problem with that although a while back i did drop it down to 5.5 Mhz and thats' what it is now.

[canthackit]

donnie

yes i was thing along them lines as well aint used it for years now mate

now that you can overclock

got to try and remember how to set it up, do you remember the old was it tty orr tts...think i need the tut for that as well

thanks & regards: canthackit

[Sicilian]

With the ecm times at 246 is the picture stable, if it is ignore the ecm time cos from tests I know they're wrong.

Other option is smargo in the rear or Oscam, as Donnie says Oscam is the way to go.

Use oscam from here

http://www.4shared.com/dir/wnyHV50A/VIX_CAMS.html

This version enigma2-plugin-cams-oscam.1.00.4863_1.0_mipsel.ipk

[Sicilian]

donnie

yes i was thing along them lines as well aint used it for years now mate

now that you can overclock

got to try and remember how to set it up, do you remember the old was it tty orr tts...think i need the tut for that as well

thanks & regards: canthackit

This might help http://www.world-of-satellite.com/sh...ht=smargo+card

[canthackit]

so tihs is where i am atm

top slot.
set to /sci1
clock speed 5.5 mhz
just checked the coax it wasn't tight enough tightned it properly thought that was the answer but no still freezing and mosacing.........it's driving me barmy.

[canthackit]

yes thats what i want Boss thanks

[Sicilian]

Another good thread http://www.world-of-satellite.com/sh...ht=smargo+card

I can test in the morning to see what works best.

[Donnie]

SERIAL READER : /dev/ttyUSB0 smartreader+

SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000

[canthackit]

are the drivers in place nowadays or do will still have to load them manually?

are you sure its tty donnie

cant remember the path to them

[Donnie]

From memory as I have not used my smargos for a long time, it is tty for OE1.6 and tts for OE1.5

[Sicilian]

are the drivers in place nowadays or do will still have to load them manually?

are you sure its tty donnie

cant remember the path to them

Drivers are pre-installed. Just plugin smargo and reboot.

[canthackit]

done all that and it aint worked.

so i've done something wrong all the line

card chip up or down?