How to flash a VU+ Uno using a USB stick
Quick guide how to flash a VU+ Uno receiver with a USB stick. Tools required are just your favourite image and at least a 128mb memory stick formatted FAT32.
1. Format you memory stick on you PC FAT32.
2. Create a directory in called vuplus.
3. Within the the vuplus directory create another folder called uno.
4. Unzip the USB upgrade files (4) into that directory.
The 4 files are :
boot_cfe_auto.jffs2
kernel_cfe_auto.bin
root_cfe_auto.jffs2
splash_cfe_auto.bin
5. Power off your VU+ Uno.
6. Insert memory stick into front USB slot.
7. Power on your VU+ Uno and follow the on screen instructions.
On Screen Instructions will include press ch- on the Uno [not remote] to initiate flash
This must be done within 10 seconds as i have found or it will boot box as normal
once done it will advise you to remove USB Stick and reboot
Thats it your done.
Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Reply With Quote
