Hi!
PLI team already supports this box that will be available on the market in the next days. Will VIX Team support this receiver too? That would be GREAT!
cu
KJ
Hi!
PLI team already supports this box that will be available on the market in the next days. Will VIX Team support this receiver too? That would be GREAT!
cu
KJ
well as there is no boxes to test on, it is impossible to be 100% certain that any image will run. as for will we support it, well we added support (theoretical) to include the et5000 before pli did, we just need a box to test it on.
http://openvix.git.sourceforge.net/g...7cb9f0472326f2
also looking trough the pli git, i would not trust it at all, there using the firmware for the VFD from the ET9000 and not the correct firmware for the ET5000.
so use at your own risk.
the ViX team will not release an image to the public that has NOT been tested, we do not want you to brick your box, we just work like that.
Andy.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
bassethound (03-04-11),kleinerjunge (03-04-11),Larry-G (03-04-11),Sicilian (03-04-11)
Well, nice to here that you will support it as soon as it will be available!!
Thx!!!
cu
KJ
you never know we may even support this ugly thing if it ever comes to market
et8000front.jpg
400MHz MIPS processor
* CPU: BCM7405
* HDTV H.264 hardware
* plug & play Tuner
* Tuner: DVB-S, optional: DVB-C, DVB-T
* OSD Linux operating system
* 10/100 Ethernet LAN port
* colored OLED display
* integrated fan
* 3 x USB 2.0 ports.
* 1 x SATA for internal HDD
* 1 x eSATA External
* 1 x HDMI output
* 1 x YUV output
* 2 x Common Interface slots
* 2 x card readers installed
* Multimedia video / audio streaming over network
* S / PDIF Dolby Digital AC3 output
* 2 Scart (RGB, CVBS or S-Video)
* RS232 interface
* 8MB Separate boat storage (bootloader can not be damaged!)
* 128MB Flash / 512 MB DDR Memory
* DiSEqC 1.0/1.1/1.2/1.3 USALS
* Media Player
* Direct Download Plugin
* PIP (Picture in Picture)
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
FPVERSION_et5000 = "10"
FPVERSION_et9000 = "10"
SRC_URI = " \
http://www.et-view.com/download/fpupdate-${PV}.zip \
http://www.et-view.com/download/avrmain-${MACHINE}-${FPVERSION}.hex \
So firmware for frontpanel is good, it takes nicely the FP software of ET5000 model
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
bassethound (08-04-11)
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
It means, we have no boxes that we can test this with... Without having a box to test this with, we cannot be sure whether the image will work with the box, never mind whether it will be stable... Hence, we won't release an image. We want to ensure that our images work fine with the box, and that everything runs perfectly!
Ok, but what is the problem? That xTrend didn't provide for you a box for free? Or was it the problem that until now the box wasn't available?
cu
KJ
well we are hobbiest and make these images as a hobbie and to make our veiwing of a receiver more pleasureable at the moment the team possesses Vu+ DUO's Vu+Solo's Clarke Tech ET-9000
so for us to have a pleasurable experience we made the image to help us and also at the same time help you
The Xtrend ET-5000 is a machine that none of us possess so we cannot build a image for it as extensive testing is needed before release
As for FREE boxes well just to make an image i dont see any of the team paying out money on a box to make an image unless its a box that one member is to buy anyway so it would be nice of Xtrend to make the offer of giving us a test box if they wish to see the VIX image supported on the box.
Otherwise ET-5000 and VIX will have to wait till one of the team members buys the box
Hope this clears up yr confusion
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
sadly some people dont realize the real cost it takes to produce a FREE image. especially when the boxes cost several hundred £££'s. no one here is asking for freebies but no one is going to rush out and buy one just so you can get your free image either.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Hi,I think,Xtrend Et5000 must first spread before starting other teams to build Images.Xtrend is a new brand and that takes time.
1x Et9000
1x Et9200
1x Dm 8000