How to install a fan ET9000 PDF

[basilyoung]

What is obvious is fact that you have very limited electrotechnical knowledge, so who are you to recommend anything?

Besides which the ET9000 fan output is ~3.2v, as measured by a professional, and since you cannot say there is something wrong with my box, common sense tells you the recommend fan voltage is 3.3v.

All of which is completely irrelevant because if a 12v fan is working fine at the reduced voltage and is not overloading the fan drive circuitry, then there is no harm.

Since you or possibly anyone does not know the current drive capability of the ET9000 you cannot recommend any fan of any voltage, because if a 12v fan runs on 3.3v then thats fine, however if you run any fan in an ET9000 that draws too much CURRENT it will damage the fan drive circuit.

As I have already explained running any fan on 3.3v will draw less current than running it on 12v, you are making yourself look a little silly.

With respect, your tech knowledge seems quite good ( probrably very good ) but please try to keep your other comments a little less personal, as they could be taken as offensive comments, ( not having a pop at you ) but thanks for your input, and hope that once the ideal solution is found, you post your results,

many thanks
baz