Lost Openvix backup menu

[ross_37]

Hi
I have just updated the software on Octagon Sx88V2 from Openvix 6.4.004 to 6.4.007 and when going to Menu l can't see vix menu items any pointers ?

[twol]

Hi
I have just updated the software on Octagon Sx88V2 from Openvix 6.4.004 to 6.4.007 and when going to Menu l can't see vix menu items any pointers ?

post debug log......... to enable menu/setup/system/log/settings ... enable, set local time
post here

[ross_37]

Hi twol Please find the debug logs as requested Enigma2_debug_2023-10-05_13-57-32.log

[twol]

How did you update the image, via software update or online flash?

Either way you need to flash the receiver with latest software

[ross_37]

I completed a software update
Plan to upgrade again reinstalling 6.4.007

[twol]

I completed a software update
Plan to upgrade again reinstalling 6.4.007

You need to flash as that image is corrupted, hence no ViX plugin

[ross_37]

Hi twol
I have got myself into a problem in that l went into the recovery mode and reloaded the 6.4.007 which has resulted in me loosing the dual boot configuration
Currently l have thumbnail_IMG_2397.jpg and not sure how to progress to bring it back thumbnail_IMG_2398.jpg
would welcome some guideance

[twol]

Hi twol
I have got myself into a problem in that l went into the recovery mode and reloaded the 6.4.007 which has resulted in me loosing the dual boot configuration
Currently l have thumbnail_IMG_2397.jpg and not sure how to progress to bring it back thumbnail_IMG_2398.jpg
would welcome some guideance

so you have both slots loaded with OpenViX, one is 6.4.4 and the other 6.4.7 correct??

[ross_37]

Hi twol
yes but not sure how to load the dual boot to replace the 6.4.007 or where to get the software from.
Am l right sugesting the network mutiboot image ?

[twol]

Hi twol
yes but not sure how to load the dual boot to replace the 6.4.007 or where to get the software from.
Am l right sugesting the network mutiboot image ?

you still have 2 multiboot slots ....... so if you have now installed 6.4.007 and boot to it, you should be able to resore settings and finish the initialisation.
After that you should be able to use teh ViX plugin to flash another image into slot 1 or 2.
If by the dual boot, you mean the DefineOS image (?), then you would have to download from the network, but not sure why you would want this factory (Octagon) image.

[ross_37]

hi twol

Thank you for your help. I booted the box from the 6.4.004 and upgraded the box to 6.4.7 but l have the same problem as l origionally upgraded the box no Vix menus which you indicated was corrupt? is the curruption coming from the upgrade download?

[ross_37]

Hi twol

I am looking to go back to 6.4.4 but not sure how to load from USB as there is no download available on the download site

https://www.openvix.co.uk/index.php/...ashing-guides/

[twol]

hi twol

Thank you for your help. I booted the box from the 6.4.004 and upgraded the box to 6.4.7 but l have the same problem as l origionally upgraded the box no Vix menus which you indicated was corrupt? is the curruption coming from the upgrade download?

You used software update?

[twol]

So if you have 6.4.4 installed and working with the ViX plugin....
Blue button, select VIX
Run Backup settings.
Then choose ImageManager , go to downloads and download latest, then flash to slot 2 --- on reboot restore settings

[ross_37]

Hi twol

I have 6.4.004 working now but when looking at the multiboot selector l only have the recovery and the slot 1 6.4.4 current
I seem to have lost the 2 slots that l had previously