Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.

View Entry Info: Streaming HD problem

Category:
Possible Bug
What ViX Image build number are you using?
Please provide your ViX Team image build number. Menu > Information > About > Build number > ENTER THIS NUMBER e.g. 4.2.028
6.3.001
Have you tried a flash WITHOUT settings restore?
Have you tried this? PLEASE SELECT YES OR NO.
Yes
Have you tried a flash WITH settings restore?
Have you tried this? PLEASE SELECT YES OR NO.
No
Attachments
Results 1 to 15 of 15

Thread: Streaming HD problem

  1. #1

    Title
    Junior Member
    Join Date
    Apr 2015
    Posts
    6
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Streaming HD problem

    Hi,

    The error occurs on sf8008: when watching an HD program on TV and streaming another HD program to Chromecast 4 or VLC, the stream is interrupted after about 1 minute. breaking up also changes the channel to TV. Stream with transcoding is OK.

    The problem does not occur on ATV and openPLI.

    Code:
    <   576.8557> 08:00:51.2436 [eInputDeviceInit] 1 6a (106) 1
    <   576.8557> 08:00:51.2437 [eRCDeviceInputDev] emit: 1
    <   576.8562> 08:00:51.2441 [InfoBarGenerics] Key: 106 (Make) KeyID='KEY_RIGHT' Binding='('RIGHT',)'.
    <   576.8563> 08:00:51.2442 [ActionMap] Keymap 'DirectionActions' -> Action = 'right'.
    <   577.0646> 08:00:51.4526 [eInputDeviceInit] 0 6a (106) 1
    <   577.0647> 08:00:51.4526 [eRCDeviceInputDev] emit: 0
    <   577.0659> 08:00:51.4539 [InfoBarGenerics] Key: 106 (Break) KeyID='KEY_RIGHT' Binding='('RIGHT',)'.
    <   579.2288> 08:00:53.6168 [eInputDeviceInit] 1 ae (174) 1
    <   579.2289> 08:00:53.6169 [eRCDeviceInputDev] emit: 1
    <   579.2293> 08:00:53.6173 [InfoBarGenerics] Key: 174 (Make) KeyID='KEY_EXIT' Binding='('EXIT',)'.
    <   579.4377> 08:00:53.8256 [eInputDeviceInit] 0 ae (174) 1
    <   579.4377> 08:00:53.8257 [eRCDeviceInputDev] emit: 0
    <   579.4381> 08:00:53.8261 [InfoBarGenerics] Key: 174 (Break) KeyID='KEY_EXIT' Binding='('EXIT',)'.
    <   579.4383> 08:00:53.8262 [ActionMap] Keymap 'OkCancelActions' -> Action = 'cancel'.
    <   582.6347> 08:00:57.0227 [eInputDeviceInit] 1 192 (402) 1
    <   582.6348> 08:00:57.0228 [eRCDeviceInputDev] emit: 1
    <   582.6357> 08:00:57.0236 [InfoBarGenerics] Key: 402 (Make) KeyID='KEY_CHANNELUP' Binding='('BOUQUET+',)'.
    <   582.8434> 08:00:57.2314 [eInputDeviceInit] 0 192 (402) 1
    <   582.8435> 08:00:57.2314 [eRCDeviceInputDev] emit: 0
    <   582.8441> 08:00:57.2321 [InfoBarGenerics] Key: 402 (Break) KeyID='KEY_CHANNELUP' Binding='('BOUQUET+',)'.
    <   582.8445> 08:00:57.2324 [ActionMap] Keymap 'InfobarChannelSelection' -> Action = 'ChannelPlusPressed'.
    <   582.8463> 08:00:57.2342 [Navigation] playing ref 1:0:1:1139:2AF8:13E:820000:0:0:0:
    <   582.8467> 08:00:57.2346 [eDVBCAService] free slot 0 demux 0 for service 1:0:1:C22:1E78:71:820000:0:0:0:
    <   582.8467> 08:00:57.2346 [eDVBCAService] free service 1:0:1:C22:1E78:71:820000:0:0:0:
    <   582.8589> 08:00:57.2469 [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
    <   582.8590> 08:00:57.2470 [eDVBPCR0] DEMUX_STOP ok
    <   582.8592> 08:00:57.2471 [eDVBPCR0] destroy
    <   582.8592> 08:00:57.2471 [eDVBVideo0] DEMUX_STOP  ok
    <   582.8592> 08:00:57.2472 [eDVBVideo0] VIDEO_STOP ok
    <   582.8594> 08:00:57.2473 [eDVBVideo0] destroy
    <   582.8594> 08:00:57.2473 [eDVBAudio0] AUDIO_STOP ok
    <   582.8594> 08:00:57.2474 [eDVBAudio0] DEMUX_STOP ok
    <   582.8594> 08:00:57.2474 [eDVBAudio0] AUDIO_CONTINUE ok
    <   582.8595> 08:00:57.2474 [eDVBAudio0] destroy
    <   582.8595> 08:00:57.2474 [eDVBText0] DEMUX_STOP ok
    <   582.8595> 08:00:57.2475 [decoder][eDVBText] stopCaching
    <   582.8602> 08:00:57.2481 [eDVBText0] destroy
    <   582.8602> 08:00:57.2482 [decoder][eDVBText] resetPID
    <   582.8603> 08:00:57.2482 [decoder][eDVBText] freeCache
    <   582.8629> 08:00:57.2508 [eDVBResourceManager] start release channel timer
    <   582.8633> 08:00:57.2513 [servicedvb][eDVBServicePlay] now running: m_is_streamx set by m_is_stream 0
    <   582.8634> 08:00:57.2513 [servicedvb][eDVBServicePlay] now running: m_is_pvr set to; 0
    <   582.8634> 08:00:57.2514 [servicedvb][eDVBServicePlay][start] m_is_stream set to: 0
    <   582.8634> 08:00:57.2514 [servicedvb][eDVBServicePlay][start] m_is_pvr set to; 0
    <   582.8971> 08:00:57.2850 [eFilePushThreadRecorder] Warning: All write buffers busy
    <   582.8972> 08:00:57.2852 [eDVBRecordFileThread] cancelling
    <   582.8974> 08:00:57.2854 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.8998> 08:00:57.2878 [Notifications] RemovePopup, id = ZapError
    <   582.9001> 08:00:57.2881 [eDVBRecordStreamThread] wait failed: Function not implemented
    <   582.9002> 08:00:57.2882 [eFilePushThreadRecorder] WRITE ERROR, aborting thread: Function not implemented
    <   582.9003> 08:00:57.2882 [eDVBRecordStreamThread] cancelling aio
    <   582.9004> 08:00:57.2883 [eDVBRecordStreamThread] ok
    <   582.9004> 08:00:57.2884 [eDVBRecordFileThread] waiting for aio to complete
    <   582.9004> 08:00:57.2884 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9005> 08:00:57.2884 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9005> 08:00:57.2884 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9005> 08:00:57.2884 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9005> 08:00:57.2884 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9005> 08:00:57.2885 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9006> 08:00:57.2885 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9006> 08:00:57.2885 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9006> 08:00:57.2886 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9007> 08:00:57.2886 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9007> 08:00:57.2886 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9007> 08:00:57.2886 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9007> 08:00:57.2887 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9007> 08:00:57.2887 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9007> 08:00:57.2887 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9008> 08:00:57.2887 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9008> 08:00:57.2887 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9008> 08:00:57.2887 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9008> 08:00:57.2888 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9008> 08:00:57.2888 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9009> 08:00:57.2888 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9009> 08:00:57.2888 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9009> 08:00:57.2888 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9009> 08:00:57.2889 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9009> 08:00:57.2889 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9010> 08:00:57.2889 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9010> 08:00:57.2889 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9010> 08:00:57.2890 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9010> 08:00:57.2890 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9011> 08:00:57.2890 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9011> 08:00:57.2890 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9011> 08:00:57.2890 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9011> 08:00:57.2891 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9011> 08:00:57.2891 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9012> 08:00:57.2891 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9012> 08:00:57.2891 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9012> 08:00:57.2891 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9012> 08:00:57.2892 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9012> 08:00:57.2892 [eDVBRecordFileThread] wait: aio_return returned failure: Function not implemented
    <   582.9013> 08:00:57.2892 [eDVBRecordFileThread] buffer usage histogram (40 buffers of 188 kB)
    <   582.9013> 08:00:57.2892 [eDVBRecordFileThread]   0:  27946
    <   582.9013> 08:00:57.2892 [eDVBRecordFileThread]   1: 585702
    <   582.9013> 08:00:57.2893 [eDVBRecordFileThread]   2:  40498
    <   582.9013> 08:00:57.2893 [eDVBRecordFileThread]   3:   5152
    <   582.9014> 08:00:57.2893 [eDVBRecordFileThread]   4:   1990
    <   582.9014> 08:00:57.2893 [eDVBRecordFileThread]   5:   1111
    <   582.9014> 08:00:57.2893 [eDVBRecordFileThread]   6:    779
    <   582.9014> 08:00:57.2894 [eDVBRecordFileThread]   7:    601
    <   582.9014> 08:00:57.2894 [eDVBRecordFileThread]   8:    460
    <   582.9014> 08:00:57.2894 [eDVBRecordFileThread]   9:    320
    <   582.9015> 08:00:57.2894 [eDVBRecordFileThread]  10:    212
    <   582.9015> 08:00:57.2894 [eDVBRecordFileThread]  11:    153
    <   582.9015> 08:00:57.2894 [eDVBRecordFileThread]  12:    101
    <   582.9015> 08:00:57.2894 [eDVBRecordFileThread]  13:     69
    <   582.9015> 08:00:57.2895 [eDVBRecordFileThread]  14:     44
    <   582.9015> 08:00:57.2895 [eDVBRecordFileThread]  15:     41
    <   582.9016> 08:00:57.2895 [eDVBRecordFileThread]  16:     29
    <   582.9016> 08:00:57.2895 [eDVBRecordFileThread]  17:     29
    <   582.9016> 08:00:57.2895 [eDVBRecordFileThread]  18:     25
    <   582.9016> 08:00:57.2895 [eDVBRecordFileThread]  19:     18
    <   582.9016> 08:00:57.2896 [eDVBRecordFileThread]  20:     17
    <   582.9016> 08:00:57.2896 [eDVBRecordFileThread]  21:     15
    <   582.9017> 08:00:57.2896 [eDVBRecordFileThread]  22:     12
    <   582.9017> 08:00:57.2896 [eDVBRecordFileThread]  23:     11
    <   582.9017> 08:00:57.2896 [eDVBRecordFileThread]  24:      9
    <   582.9017> 08:00:57.2896 [eDVBRecordFileThread]  25:      8
    <   582.9017> 08:00:57.2897 [eDVBRecordFileThread]  26:      8
    <   582.9018> 08:00:57.2897 [eDVBRecordFileThread]  27:      8
    <   582.9018> 08:00:57.2897 [eDVBRecordFileThread]  28:      8
    <   582.9018> 08:00:57.2897 [eDVBRecordFileThread]  29:      9
    <   582.9018> 08:00:57.2897 [eDVBRecordFileThread]  30:      8
    <   582.9018> 08:00:57.2898 [eDVBRecordFileThread]  31:      7
    <   582.9018> 08:00:57.2898 [eDVBRecordFileThread]  32:      6
    <   582.9019> 08:00:57.2898 [eDVBRecordFileThread]  33:      5
    <   582.9019> 08:00:57.2898 [eDVBRecordFileThread]  34:      5
    <   582.9019> 08:00:57.2898 [eDVBRecordFileThread]  35:      4
    <   582.9019> 08:00:57.2898 [eDVBLocalTimerHandler] remove channel 0x2e08f48
    <   582.9019> 08:00:57.2898 [eDVBRecordFileThread]  36:      2
    <   582.9019> 08:00:57.2899 [eDVBRecordFileThread]  37:      3
    <   582.9019> 08:00:57.2899 [eDVBRecordFileThread]  38:      2
    <   582.9020> 08:00:57.2899 [eDVBRecordFileThread]  39:      1
    <   582.9020> 08:00:57.2899 [eDVBRecordFileThread]  40:      1
    <   582.9020> 08:00:57.2900 [eFilePushThreadRecorder] THREAD STOP
    <   582.9021> 08:00:57.2901 [eEPGTransponderDataReader] remove channel 0x2e08f48
    <   582.9104> 08:00:57.2984 [eEPGChannelData] abort caching events !!
    <   582.9145> 08:00:57.3025 [eDVBResourceManager] allocate channel.. 2af8:013e
    <   582.9146> 08:00:57.3025 [eDVBResourceManager] available channel.. 0190:013e
    <   582.9150> 08:00:57.3029 [eDVBFrontend0] tune
    <   582.9151> 08:00:57.3030 [eDVBSatelliteEquipmentControl] [prepare] UnicableTuningWord 0x120d2, guard_offset 0
    <   582.9151> 08:00:57.3030 **** Tuning JESS
    <   582.9151> 08:00:57.3030 **** frequency_mhz: 10719
    <   582.9151> 08:00:57.3030 **** lo_mhz: 9750
    <   582.9151> 08:00:57.3031 **** T: 869
    <   582.9151> 08:00:57.3031 **** position: 0
    <   582.9152> 08:00:57.3032 **** ub: 9
    <   582.9153> 08:00:57.3032 **** mode: 0
    <   582.9153> 08:00:57.3033 **** JESS: 70 4b 65 00
    <   582.9153> 08:00:57.3033 [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
    <   582.9154> 08:00:57.3033 [eDVBFrontend0] prepare_sat System 1 Freq 10719000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
    <   582.9154> 08:00:57.3033 [eDVBFrontend0] tuning to 1271 mhz
    <   582.9154> 08:00:57.3034 [eDVBChannel] OURSTATE: tuning
    <   582.9154> 08:00:57.3034 [eDVBServicePMTHandler] allocate Channel: res 0
    <   582.9155> 08:00:57.3034 [eDVBCIInterfaces] addPMTHandler 1:0:1:1139:2AF8:13E:820000:0:0:0:
    <   582.9156> 08:00:57.3035 [eDVBChannel] getDemux cap=00
    <   582.9156> 08:00:57.3035 [eDVBResourceManager] allocate demux cap=00
    <   582.9156> 08:00:57.3035 [eDVBResourceManager] allocating demux adapter=0, demux=0, source=0 fesource=0
    <   582.9156> 08:00:57.3036 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    <   582.9319> 08:00:57.3199 [eDVBFrontend0] set static current limiting
    <   582.9322> 08:00:57.3201 [eDVBServiceStream] stream write error
    <   582.9322> 08:00:57.3201 [eDVBServiceStream] stop streaming m_state 2
    <   583.3423> 08:00:57.7303 [eFilePushThreadRecorder] stopping thread.
    <   583.3424> 08:00:57.7303 [eThread] send signal to non running thread
    <   583.3439> 08:00:57.7318 [eDVBCAService] free slot 0 demux 1 for service 1:0:1:32DE:190:13E:820000:0:0:0:
    <   583.3439> 08:00:57.7319 [eDVBCAService] free service 1:0:1:32DE:190:13E:820000:0:0:0:
    <   583.3447> 08:00:57.7326 [eDVBLocalTimerHandler] remove channel 0x2e33750
    <   583.3448> 08:00:57.7327 [eEPGTransponderDataReader] remove channel 0x2e33750

  2. #2

    Title
    Junior Member
    Join Date
    Apr 2015
    Posts
    6
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Solution of my problem:
    Code:
    diff -urN git/lib/dvb/filepush.cpp git/lib/dvb/filepush.cpp
    --- git/lib/dvb/filepush.cpp	2023-01-06 22:41:41.710419783 +0100
    +++ git/lib/dvb/filepush.cpp	2023-01-10 20:54:31.726915891 +0100
    @@ -17,7 +17,7 @@
     	 m_blocksize(blocksize),
     	 m_buffersize(buffersize),
     	 m_buffer((unsigned char *)malloc(buffersize)),
    -	 m_messagepump(eApp, 0, "eFilePushThread"),
    +	 m_messagepump(eApp, 0),
     	 m_run_state(0)
     {
     	if (m_buffer == NULL)
    @@ -37,12 +37,6 @@
     
     static void ignore_but_report_signals()
     {
    -	/* we must set a signal mask for the thread otherwise signals don't have any effect */
    -	sigset_t sigmask;
    -	sigemptyset(&sigmask);
    -	sigaddset(&sigmask, SIGUSR1);
    -	pthread_sigmask(SIG_UNBLOCK, &sigmask, NULL);
    -	
     	/* we set the signal to not restart syscalls, so we can detect our signal. */
     	struct sigaction act = {};
     	act.sa_handler = signal_handler; // no, SIG_IGN doesn't do it. we want to receive the -EINTR
    @@ -328,47 +322,41 @@
     	m_buffer(buffer),
     	m_overflow_count(0),
     	m_stop(1),
    -	m_messagepump(eApp, 0, "eFilePushThreadRecorder")
    +	m_messagepump(eApp, 0)
     {
     	CONNECT(m_messagepump.recv_msg, eFilePushThreadRecorder::recvEvent);
     }
     
     void eFilePushThreadRecorder::thread()
     {
    -	ignore_but_report_signals();
    -	hasStarted(); /* "start()" blocks until we get here */
     	setIoPrio(IOPRIO_CLASS_RT, 7);
    +
     	eDebug("[eFilePushThreadRecorder] THREAD START");
     
    -	/* m_stop must be evaluated after each syscall */
    -	/* if it isn't, there's a chance of the thread becoming deadlocked when recordings are finishing */
    +	/* we set the signal to not restart syscalls, so we can detect our signal. */
    +	struct sigaction act;
    +	act.sa_handler = signal_handler; // no, SIG_IGN doesn't do it. we want to receive the -EINTR
    +	act.sa_flags = 0;
    +	sigaction(SIGUSR1, &act, 0);
    +
    +	hasStarted();
    +
    +	/* m_stop must be evaluated after each syscall. */
     	while (!m_stop)
     	{
    -		/* this works around the buggy Broadcom encoder that always returns even if there is no data */
    -		/* (works like O_NONBLOCK even when not opened as such), prevent idle waiting for the data */
    -		/* this won't ever hurt, because it will return immediately when there is data or an error condition */
    -
    -		struct pollfd pfd = { m_fd_source, POLLIN, 0 };
    -		poll(&pfd, 1, 100);
    -		/* Reminder: m_stop *must* be evaluated after each syscall. */
    -		if (m_stop)
    -			break;
    -
     		ssize_t bytes = ::read(m_fd_source, m_buffer, m_buffersize);
    -		/* And again: Check m_stop regardless of read success. */
    -		if (m_stop)
    -			break;
    -
     		if (bytes < 0)
     		{
     			bytes = 0;
    +			/* Check m_stop after interrupted syscall. */
    +			if (m_stop) {
    +				break;
    +			}
     			if (errno == EINTR || errno == EBUSY || errno == EAGAIN)
    -			{
     #if HAVE_HISILICON
     				usleep(100000);
     #endif
    -				continue;
    -			}
    +			continue;
     			if (errno == EOVERFLOW)
     			{
     				eWarning("[eFilePushThreadRecorder] OVERFLOW while recording");
    @@ -393,7 +381,7 @@
     #endif
     		if (w < 0)
     		{
    -			eWarning("[eFilePushThreadRecorder] WRITE ERROR, aborting thread: %m");
    +			eDebug("[eFilePushThreadRecorder] WRITE ERROR, aborting thread: %m");
     			sendEvent(evtWriteError);
     			break;
     		}
    Other fixes:
    Code:
    diff -urN git/configure.ac git/configure.ac
    --- git/configure.ac	2022-12-20 20:15:09.622769983 +0100
    +++ git/configure.ac	2022-12-20 20:15:49.193938164 +0100
    @@ -450,7 +450,7 @@
     if test "$BOXTYPE" == "sf8008" -o "$BOXTYPE" == "sf8008m" -o "$BOXTYPE" == "sx988" -o "$BOXTYPE" == "sfx6008" -o "$BOXTYPE" == "gbmv200" -o "$BOXTYPE" == "viper4k" -o "$BOXTYPE" == "beyonwizv2" -o "$BOXTYPE" == "ustym4kpro"; then
     	AC_DEFINE(HAVE_HISILICON, 1,[define add HISILICON chip])
     	AC_DEFINE(CONFIG_HISILICON_FB, 1,[define add HISILICON framebuffer blit])
    -	AC_DEFINE(FORCE_BLENDING_ACCELERATION, 1,[define when the framebuffer acceleration has alphablending support, but detection slow down all])	
    +	AC_DEFINE(FORCE_ALPHABLENDING_ACCELERATION, 1,[define when the framebuffer acceleration has alphablending support, but detection slow down all])	
     fi
     
     if test "$BOXTYPE" == "u5" -o "$BOXTYPE" == "u5pvr" -o "$BOXTYPE" == "u51" -o "$BOXTYPE" == "u52" -o "$BOXTYPE" == "u53" -o "$BOXTYPE" == "u532" -o "$BOXTYPE" == "u533" -o "$BOXTYPE" == "u54" -o "$BOXTYPE" == "u55" -o "$BOXTYPE" == "u56" -o "$BOXTYPE" == "u57" -o "$BOXTYPE" == "u571" -o "$BOXTYPE" == "u41" -o "$BOXTYPE" == "u42" -o "$BOXTYPE" == "u43"; then
    Code:
    diff -urN git/lib/python/Plugins/SystemPlugins/CommonInterfaceAssignment/plugin.py git/lib/python/Plugins/SystemPlugins/CommonInterfaceAssignment/plugin.py
    --- git/lib/python/Plugins/SystemPlugins/CommonInterfaceAssignment/plugin.py	2023-01-09 21:55:50.006362972 +0100
    +++ git/lib/python/Plugins/SystemPlugins/CommonInterfaceAssignment/plugin.py	2023-01-09 21:47:31.651902013 +0100
    @@ -130,7 +130,7 @@
     		self["ServiceList_desc"] = StaticText(_("Assigned services/provider:"))
     		self["ServiceList_info"] = StaticText()
     
    -		self["actions"] = ActionMap(["ColorActions", "SetupActions", "MenuActions"],
    +		self["actions"] = ActionMap(["ColorActions", "OkCancelActions", "MenuActions"],
     			{
     				"green": self.greenPressed,
     				"red": self.redPressed,
    @@ -379,7 +379,7 @@
     
     	def __init__(self, session, ci_slot="9"):
     		CIconfigMenu.__init__(self, session, ci_slot)
    -		self["actions"] = ActionMap(["ColorActions", "SetupActions", "MenuActions"],
    +		self["actions"] = ActionMap(["ColorActions", "OkCancelActions", "MenuActions"],
     			{
     				"green": self.greenPressed,
     				"red": self.redPressed,
    Thanks and regards

  3. #3
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    22,773
    Thanks
    6,192
    Thanked 8,910 Times in 6,030 Posts
    Can you please submit a pull request.

  4. #4

    Title
    Junior Member
    Join Date
    Apr 2015
    Posts
    6
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Sended pull request.

  5. The Following User Says Thank You to zukon For This Useful Post:

    abu baniaz (11-01-23)

  6. #5
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    7,840
    Thanks
    941
    Thanked 2,712 Times in 2,082 Posts
    There are errors in those changes, unnecessary changes that remove debug source identification and changes to configure.ac that make no difference to the sf8008 type receivers. - I would like to know the source of the change, so that we can discuss

    Not being negative, just would like to understand where it has come from, as it has to work across all mips/arm/ hisilicon boxes … and this module (filepush) has been through many discussions/changes across the images with many false solutions to issues
    Last edited by twol; 11-01-23 at 22:52.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  7. #6

    Title
    Junior Member
    Join Date
    Apr 2015
    Posts
    6
    Thanks
    0
    Thanked 2 Times in 2 Posts
    I just revert older version from repo with cosmeting changes. Nothing new. This fix streaming problem. That's all.

    Problem exists only on sf8008, exemply on zgemma h9twin everything is OK with straming. Unbox and connect sf8008, flash 6.3 and check.
    Last edited by zukon; 12-01-23 at 06:42.

  8. #7
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    7,840
    Thanks
    941
    Thanked 2,712 Times in 2,082 Posts
    Quote Originally Posted by zukon View Post
    I just revert older version from repo with cosmeting changes. Nothing new. This fix streaming problem. That's all.

    Problem exists only on sf8008, exemply on zgemma h9twin everything is OK with straming. Unbox and connect sf8008, flash 6.3 and check.
    so not sure if you are building or not, but here is a version of filepush.cpp that includes changes for broadcom/Arm and your sf8008 code with some updated changes

    let me know how this works for you .....the changes in filepush are extensive and made because of numerous issues... which the later code fixed, so I have specifically tried to make your changes only for the sf8008 (and obviously similar receivers)
    Attached Files Attached Files
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  9. #8

    Title
    Junior Member
    Join Date
    Apr 2015
    Posts
    6
    Thanks
    0
    Thanked 2 Times in 2 Posts
    IMO new filepush.cpp is perfect! Thanks!

    Regards

  10. #9
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    7,840
    Thanks
    941
    Thanked 2,712 Times in 2,082 Posts
    Quote Originally Posted by zukon View Post
    IMO new filepush.cpp is perfect! Thanks!

    Regards
    Can you post me a debug log - whilst running to PC, would like to see whats different
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  11. #10

    Title
    Junior Member
    Join Date
    Apr 2015
    Posts
    6
    Thanks
    0
    Thanked 2 Times in 2 Posts
    In attachment. 30-40 min with changing channels on TV (stream is the same HD channel). Before fix after 1 max 2 min stream was close. The same if watching on TV channel was changed. Now is perfect.
    Attached Files Attached Files

  12. The Following User Says Thank You to zukon For This Useful Post:

    twol (13-01-23)

  13. #11
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    7,840
    Thanks
    941
    Thanked 2,712 Times in 2,082 Posts
    Quote Originally Posted by zukon View Post
    In attachment. 30-40 min with changing channels on TV (stream is the same HD channel). Before fix after 1 max 2 min stream was close. The same if watching on TV channel was changed. Now is perfect.
    That debug log is pretty clean - nice
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
    ------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using Legacy ports on multiswitches
    Zgemma H9 C/S into Giga4K

  14. #12
    Ev0's Avatar
    Title
    V.I.P
    Join Date
    Jan 2011
    Posts
    998
    Thanks
    338
    Thanked 393 Times in 240 Posts
    Great work guys, this has not only fixed the issue you had noticed, but it has (for me atleast) fixed an issue with stream-relay channels where it would request a double ecm every few seconds causing it to trip over itself and therefore glitch or freeze.
    Last edited by Ev0; 14-01-23 at 21:18.


  15. #13
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    12,726
    Thanks
    1,946
    Thanked 4,498 Times in 2,977 Posts
    Quote Originally Posted by Ev0 View Post
    Great work guys, this has not only fixed the issue you had noticed, but it has (for me atleast) fixed an issue with stream-relay channels where it would request a double ecm every few seconds causing it to trip over itself and therefore glitch or freeze.
    On what box?

  16. #14
    Ev0's Avatar
    Title
    V.I.P
    Join Date
    Jan 2011
    Posts
    998
    Thanks
    338
    Thanked 393 Times in 240 Posts
    Quote Originally Posted by Huevos View Post
    On what box?
    sf8008, will check the trio4k and ustym 4k pro later


  17. #15
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    12,726
    Thanks
    1,946
    Thanked 4,498 Times in 2,977 Posts
    Have we tested on non-HiSi boxes?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.