abu baniaz (22-02-22)
You were right. I do not have to use the ctrl button
There was a server change a long time ago, so your box cannot connect.
There are several options available now. Of the two below, which do you want to use.
1. FTP the zipped image you downloaded to /media/hdd/imagebackups
2. Flash by command line using Putty. ( Guide to Putty in my signature)
Last edited by abu baniaz; 21-02-22 at 18:54. Reason: typo/clarity
Hello
I am in the box with eSettings+
images.jpg
A channel editor won't work. Does Esetting+ allow you to transfer files?
You have to transfer the downloaded image (no need to unzip) to /media/hdd/imagebackups You will then be able to flash it. You can use FTP client like Filezilla
Or you can flash it using Grog's script. Issue that with any terminal client like Putty. Follow the guide in my signature. You seem quite competent and should be able to do it.
Do you want me to do this over teamviewer? If so, PM me your teamviewer details
Hello
I transferred the image file to the box , see picture.images1.jpg
image manager.jpg
In webif the files are in the box
Menu > Setup > Vix > Image manager
Highlight the image you want to flash using remote keys
Blue to flash/restore
OK, I see the blue button does not do anything.
In esetting+, click on telnet, once connected, paste the following command
Code:wget --no-check-certificate -O install_vix.sh https://www.dropbox.com/s/hc2cdr116l...ll_vix.sh?dl=1 && bash install_vix.sh
I pressed the blue button on the new image file and nothing happened?
Try pressing OK instead
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
in eSetting+ i can access the box with FTP player but not Telenet
Try Putty. Guide in my signature. ( Linux commands)
Edit:
https://www.world-of-satellite.com/s...Linux-commands