Hi. I've got this multiswitch https://images-na.ssl-images-amazon....AC_SL1200_.jpg - four of the inputs are connected to 4xLNB pointing at Astra 28.2 and im planning to connect the remaining four to Hotbird dish in the future.
Three of the outputs are wired up to triplex euro modules like this one: https://i.ebayimg.com/images/g/t4UAA...kzX/s-l500.jpg - im not sure if that's a correct set up, but it seems to work.
The bigger problem is that i want to wire a TVheadend server with TBS6904 card to this setup. I have tried connecting outputs directly to the multiswitch and it works in "Universal LNB only" mode, but im missing half of muxes (TVHeadend sees 119 muxes but 66 fail to scan). I have tried "Unicable I (universal LNB)" and "Unicable II (universal LNB)" modes those dont work.
1. Can i use TBS6904 with such multiswitch at all?
2. What if i upgrade to TBS6909 - apparently it has switches built in?
3. Are there any alternatives to https://i.ebayimg.com/images/g/t4UAA...kzX/s-l500.jpg but in form of in line splitter instead of euromodule?