@knet, when you upgraded from 5.3 did you set up again from default or restore settings?
It might be relevant.
Later: abu baniaz will get you sorted. He's the expert.
@knet, when you upgraded from 5.3 did you set up again from default or restore settings?
It might be relevant.
Later: abu baniaz will get you sorted. He's the expert.
Last edited by BrokenUnusableAccount; 15-10-20 at 16:28.
knet (15-10-20)
Entry Info in post #1 suggests he's flashed 5.4.001 with no settings restored.
knet (15-10-20)
The standard Vix night skin would be the "default" then? I've tested the menu navigation changes using that skin and the normal left/right/up/down arrows on the D-pad should work. Pressing the HELP key should list the navigation keys specific to that box and remote.
GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony STR-DN 1060, Sony UHP-H1 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers
knet (15-10-20)
Please issue this command and post back the results
df -Th
knet (15-10-20)
Thanks ThoughtfulLurker61 and ccs
Like ccs said I installed brand new one with no settings restore
My setup is I have obh 4.3 in flash with openmultiboot 2.6
In omb I have obh 4.3 / openvix 5.3(before) and now 5.4 and other images
before with 5.3 I had no issue with recordings and timeshift options
Thanks abu baniaz
this is result
Filesystem Type Size Used Available Use% Mounted on
ubi0:rootfs ubifs 28.1G 2.9G 24.8G 11% /
devtmpfs devtmpfs 279.4M 8.0K 279.4M 0% /dev
/dev/sda1 ext4 28.1G 2.9G 24.8G 11% /omb
devtmpfs devtmpfs 279.4M 8.0K 279.4M 0% /dev
/dev/sda1 ext4 28.1G 2.9G 24.8G 11% /omb
ubi0:rootfs ubifs 419.7M 100.4M 319.2M 24% /usr/lib/eni
ma2/python/Plugins/Extensions/OpenMultiboot
tmpfs tmpfs 279.5M 280.0K 279.3M 0% /var/volatil
tmpfs tmpfs 64.0K 0 64.0K 0% /media
/dev/sda1 ext4 28.1G 2.9G 24.8G 11% /media/hdd
Screenshot 2020-10-15 192658.png
Last edited by knet; 15-10-20 at 18:28.
/media/hdd is there. You are running this on OpenMultiBoot, so I suspect this is why you are having issues.
Can you please post a screenshot of Menu > Information > Devices
knet (15-10-20)
yes I'm running ViX 5.4 on (OpenMultiboot 2.6 for PLi)
I dont know if that any information in it. but here you go
also that I took screenshot of memory info
device.jpg
Screenshot 2020-10-15 210030.png
Last edited by knet; 15-10-20 at 20:09.
There are a few similar reports on PLI with OpenMultiBoot. A solution has not been looked at because they don't like OMB. Workaround is to have ViX/ATV on flash memory.
Still doesn't explain why previous image is fine.
Which PLI image is on flash memory? 7.3?
knet (16-10-20)
The OMB info is rather relevant. The impression given initially was that it was an issue with OpenViX 5.4. Can you try a clean flash with OpenViX 5.4? That's what all the testing was done on.
GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony STR-DN 1060, Sony UHP-H1 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers
knet (16-10-20)
Hi abu baniaz as I explained before I have OpenBH 4.3 in flash and uninstalled their Openmultiboot plugin
because they are not been updated it like forever. if installed images like openpli or vti etc it will take the name openBH 4.3 when boot up
I have never try ViX in flash before to be honest. but is not OpenVix is very similar to OpenBH?
for ATV I try 6.4 but after installing 3 to 4 images in OMB it's get corrupted
I even try 6.3 but got the same results
I meant flashing ViX on dedicated partition on flash, rather than using OMB. Using OMB brings another environment variable into play which may affect behaviour. There have been a lot of coding changes in regard to menu navigation in 5.4, but they should work the same.
GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony STR-DN 1060, Sony UHP-H1 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers