hi every one iv just bought a new free to air satllite dish and a twin lmb for my motorised dish could some boday tell me how to set this up please in the menu setting my motorised dish is set to tuner A
hi every one iv just bought a new free to air satllite dish and a twin lmb for my motorised dish could some boday tell me how to set this up please in the menu setting my motorised dish is set to tuner A
Is it a wideband LNB or universal LNB. If you don't know, post a close up picture of LNB.
Also, to which tuner/s have you attached/connected the signal wires from new dish.
there are universal lnbs and i have 2 double tuner s conected to my vu ultino box
The Ultimo 4k takes two types of tuner, lets get this right.
Post a picture/screenshot of what you see in:
Menu > Information > Devices
I have attached mine.
Objective is to identify the letters of the tuners to which you attached/connected the universal LNBS. Otherwise you will mess it it up. The tuner configuration is the straight forward one everyone uses ( simple, single, 28.2).
deltec (27-09-20)
yes iv got that the single lmb for the free sat what im after is the set up for my double lmb on my motorised dish setings so i can record and watch another program at the same time its a normal tuner im using
The tuner that has the cable that goes directly to the LNB on motorsied dish, should be set as "Second cable of motorised LNB" in the configuration mode.
Please post the requested picture. It will help you!
deltec (27-09-20)
i dont under stand u the pic i put one lnb in to tuner A then the second lnb to tuner B in the confog is that right
i have no camra couls just explain ill understand so A of the motor dish config and B the config is that right cables go in Aand B
Last edited by deltec; 27-09-20 at 16:57.
... you don't need a camera.....
https://www.world-of-satellite.com/s...l=1#post342560
abu baniaz (27-09-20)
ill have a go like i sed A and B then set the config in A and B tuners is that right
Golden rule of tuner configuration is that every tuner must be set/configured to what is actually attached/connected/hooked up to it.
The tuner with the wire to the motor, don't touch it. If it was fine before, it will be fine now. Presuming you have not moved wires.
The tuner with the second cable of motorised LNB, set is as "second cable of motorised LNB"
do the motor cable stayes in tuner A and the lnb gos to tuner B is that right i do the config as well
Nobody suggested moving cabling. You have not said which wire is in which tuner. It does not matter which way round you do it. Tuner configuration must match the way you do it.
https://www.world-of-satellite.com/s...l=1#post349361
Last edited by abu baniaz; 27-09-20 at 17:30.