Read post 4 again and compare pictures.
To get the picture we need to help you properly:
Press menu on remote
Scroll down to "Information" and press OK
Scroll down to "Devices" and press OK
Read post 4 again and compare pictures.
To get the picture we need to help you properly:
Press menu on remote
Scroll down to "Information" and press OK
Scroll down to "Devices" and press OK
deltec (01-10-20)
1_0_1_183E_7F3_2_11A0000_0_0_0_20201001162247.jpg regards car123
abu baniaz (01-10-20)
Thank you for the picture.
This is set wrong, you have disabled it. You said it has a signal wire from dish.
In post 6, I told you:
In post 13 & 15, I repeated the same thing again and posted a link to a post with the screenshot of with what you need to set it to.The tuner that has the cable that goes directly to the LNB on motorsied dish, should be set as "Second cable of motorised LNB" in the configuration mode.
So once again, in tuner configuration, for tuner B, set it to "second cable of motorised LNB". Just press right/left to change it.
Here is the picture again.
Attachment 60662
deltec (01-10-20)
Isn’t tuner 2 terrestrial, looking at his screenshots?
Based on his screen shot:Isn’t tuner 2 terrestrial, looking at his screenshots?
Tuners A&B are satellite.
Tuner I is Hybrid. Cable/Terrestrial.
Last edited by abu baniaz; 02-10-20 at 07:05.
deltec (17-10-20)