Hi
Scenario:
2 recivers - 3 phisicly tuners - 2 satelite
Which splitter?
I want connect two box'es (total 3 tuners)
And i don't know which splitter I should use.
Thanks.
scenario.jpg
Hi
Scenario:
2 recivers - 3 phisicly tuners - 2 satelite
Which splitter?
I want connect two box'es (total 3 tuners)
And i don't know which splitter I should use.
Thanks.
scenario.jpg
Purchase from sponsor you can't go wrong
https://www.world-of-satellite.co.uk...coax-splitters
Sicilian (03-07-20)
I have different question.
How to connect one tuner to 2 Unicable LNB?
How to configure just one Tuner for 2 Unicable LNB?
Last edited by Andy_Hazza; 20-07-20 at 20:01.
You need the programmer for the LNBs.
In default mode the LNB responds to all "positions*". With the programmer you can tell one LNB to only respond to commands on "position*" 1, and the other LNB to only respond to commands on "position*" 2. Then just combine the signal onto one co-ax cable.
*position is item 9 in Unicable tuner setup screen.
Any special combiner required?