Unicable setup help

[scouse645]

just received a GT-Sat GT-S1DCSS24 SCR/dCSS Single Cable Unicable II LNB SCR24 from w/o/s shop, i need some help to setup the tuners on my gigablue quad 4k with 2xDVB-S2X FBC tuners, i need to know what settings i need in each tuner A-H. just to add i have a cable connected to A and B tuners.

[abu baniaz]

have you read the thread in Unicable section?

You can select the "dnb hello" model.

[scouse645]

Thanks, i have been reading a few bits about it, i just needed to know if i need to repeat the setup for every tuner? it doesn't seem to work with dlnb dhello selected.

[twol]

just received a GT-Sat GT-S1DCSS24 SCR/dCSS Single Cable Unicable II LNB SCR24 from w/o/s shop, i need some help to setup the tuners on my gigablue quad 4k with 2xDVB-S2X FBC tuners, i need to know what settings i need in each tuner A-H. just to add i have a cable connected to A and B tuners.

SO whats on the end of the 2 cables? 2 LNB‘S or 1 cable from a LNB and then split or??

[scouse645]

1 cable from LNB and then split.

[Willo3092]

This is how mine is set up

Tuner Setup.jpg

Tuner A.jpg

Tuner C.jpg

[scouse645]

This is how mine is set up

Tuner Setup.jpg

Tuner A.jpg

Tuner C.jpg

That lnb model number is not working on mine.

[scouse645]

The only one to work is GT-S1-2-3SCR4 but it only has 4 user bands.

[Sicilian]

The only one to work is GT-S1-2-3SCR4 but it only has 4 user bands.

GT-S3DSSR24 should work fine. Uses same userbands as the LNB you have.

[scouse645]

Thanks, been trying it for a while on the one you mention but it's not working for me. i just get tune failed message.

[abu baniaz]

Every tuner needs to be configured to make full use of the LNB. If you don't configure it, it will be in FBC Automatic, i.e loop through mode.

Attach the file called "settings" in /etc/enigma2 You will need to zip it.

[scouse645]

Every tuner needs to be configured to make full use of the LNB. If you don't configure it, it will be in FBC Automatic, i.e loop through mode.

Attach the file called "settings" in /etc/enigma2 You will need to zip it.

Thanks, i can see the file but i haven't a clue how to Attach it. just a though, the original lnb i sent for was discontinued, so they sent me the new one.

[abu baniaz]

Thanks, i can see the file but i haven't a clue how to Attach it.

A guide to attachments is here.

https://www.world-of-satellite.com/s...o-attach-files

I hope you don't need advice on how to transfer the file to your PC from the receiver. An also how to zip files.

[scouse645]

Today i have sent the LNB back so they can check it out as requested, thanks all, i will report back later.

[scouse645]

Have now got a gigablue unicable LNB, same as my box, setting it up exactly as screenshots but not working, to me it doesn't look right, attached screenshots. it's showing on tuner A 26.0e and 28.2e when it's set on 28.2 only. the one i sent back was not wired correctly, this one i bought from germany, can someone have a look and see what they think.