You cannot "couch flash update". There is no such thing. The term you are using a is a combination of two different processes. From past discussion I know what you mean, but others will not appreciate the difference.
People can do one of following
- flash latest image and optionally restore settings and plugins afterwards. Flash using Image Manager (couch flash) or flash using USB.
- perform an update
The two options to resolve the problem have been listed. I note your indication that you have run the re-install command
1. Issue the command in post 10 to reinstall the timezone files. There is a guide to using Putty here:
https://www.world-of-satellite.com/s...Linux-commands
2. Flash 019 and restore settings/plugins afterwards. Guide to flash and restore here (You can ignore create a settings backup stage as that is automated):
https://www.world-of-satellite.com/s...-and-Restores/
Last edited by abu baniaz; 29-03-20 at 19:12.
Flashed VU+ solo2 5.3.019 from USB stick yesterday and restored 5.3.018 settings and plugins. Time settings Europe Zurich - time switched correctly today.
VU+ Solo2
USB 32GB used as HDD
Diseq 13.0E 19.0E
Was on latest image, time didn't update today on my vu solo2. Ran command from IanSav via telnet, reboot and boom! All good again thankz guyz
I have one receiver (an XTrend et8000) which is OK and another (an MBTwin) which is not.
The former has the Europe/London file, the latter does not.
The problem appears to be that Europe/London is not in tzdata-europe. It is in tzdata-posix (along with the rest of the Europe files), but that's under the posix directory.
EDIT: But it is in tzdata-core.
Also, mbtwin was on 5.3.108.002, the et8000 on 5.3.020.004.
Last edited by birdman; 30-03-20 at 03:50.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
My Ultimo4k did no reset the time to British Summer Time. I went into the Time setup and the Time Zone Area is set to Europe and the Time Zone to London. If I change the time zone by scrolling through the list I never come back to London, the only way to get London to show again is to change the Time Zone Area from Europe and then back to Europe and then the area defaults to London. However BST is still not updated.
As a work around if I set the Time zone to Isle of Man then BST is set correctly. It seems wherever the list gets it's area data from, London is not included.
Regards
Raetsel
See ............ https://www.world-of-satellite.com/s...me-not-updated
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Is there a default user name and password for the Ultimo 4K, I want to run the update to correct the Time problem.
Thanks for that. I read the fix is to run a telnet command, not used that before on my receiver but keen to have a go. Is there a default user name and password to enable me to log in? If not how do I find it?
.... root and no password.
Raetsel (30-03-20)
The default username is root and there should be no password
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
Raetsel (30-03-20)
Thanks to you both for your help. Have successfully updated my time zones file as per the instructions and now have London in the list and BST is correct.
Thanks as always for posting the fix for this. Had the same problem with my Solo2 & couch flash with restore settings / plugins worked for me