So I guess my conclusion is that either the issue is cleared up on OEA 4.4 (which I currently build on) or you have a usb device attached to the receiver that is throwing up a bus error
So I guess my conclusion is that either the issue is cleared up on OEA 4.4 (which I currently build on) or you have a usb device attached to the receiver that is throwing up a bus error
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
norhap (26-11-19)
OS mio 4k plus, my build OE 4.3
yes, problem with my USB stick.
root@osmio4kplus:~# fsck.vfat /dev/sda1
fsck.fat 4.1 (2017-01-24)
0x41: Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
thanks.
twol (26-11-19)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
I have deleted a corrupt bit in my vfat partition, but the problem still remains, as soon as I return to the official lcd.py openvix the problem arises.
something similar was manifested in Lcd.py of openvision, I had to make the commit that you already know to fix it .... it does not seem very coincidental to me that in ambox .py is having these strangers.
twol (26-11-19)
no usb in the box same problem....
did you test on official openvix image ... not on your build?
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
OK - the problem is defined here (I had totally forgotten I had the change!!) -
OpenATV commit e3d70ff aarch64 fix issue with load usb.backend.libusb1.get_backend
I will issue a Pull for this and the button setup issue..
Many thanks for hanging in until we have a resolution!
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K