Please Help,

I'm trying to add a second Vu+ USB Turbo tuner to my Solo4k, but the box won't come back after rebooting.

I've already got one Turbo tuner in the top USB3 port (just beneath the LAN port), connected to dvb-c.

When I plug a second one and reboot it goes through all the start-up then hangs with the wait spinner going round. The GUI never comes back, though the console is OK to log in to. I've left if for a couple of hours, but it makes no difference.

I've updated to the latest image, but its just the same.

The wierd thing is, it does work if I only re-start the GUI.
This is how it does work....
1) Connect the tuner into the second USB3 port and attach a feed (DVB-T2 in this case).
2) Re-load the GUI and see that the tuner is detected in menu>information>devices
3) enter menu>setup>tuner config>tuners>tuner config>Tuner L - Vuplus DVB-T/C USB NIM(Turbo)...
4) Change config to Configure DVB-T>Yes
5) re-scan for channels
6) Watch on working tuner
Both Turbo tuners work, at the same time (using PIP or Vu+ Client on my phone).
I can re-start the gui as often as I like, but if I try to reboot the GUI never comes back

Any Thoughts before I have to return the second tuner for a refund??

Cheers