I have been trying to find a skin which I like and is big enough to see correct across the room. However the last one I installed seems to have stuck the box on boot at 49%.
How do I recover from this issue?
I have been trying to find a skin which I like and is big enough to see correct across the room. However the last one I installed seems to have stuck the box on boot at 49%.
How do I recover from this issue?
Telnet connection from PC, using box IP address (root/no password)
Init 4 (there is a space between)
Then filezilla (again root is logon no password)
Usr/share/enigma2 and delete skin folder
Telnet session : init 6
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
zozman (29-07-22)
FTP to the box and delete the skin folder and reboot
/usr/share/enigma2/name of skin
twol beat me to it
... and did it more elegantly
Last edited by Willo3092; 23-05-19 at 20:33.
zozman (29-07-22)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Not able to connect to the box, doesn't seem to be on the network.
You need to go to your router and check IP address.... I always use static IP addresses so normally know where my boxes are, but occasionally even then they wonder depending on the boot situation!
if its a boot failure due to a skin error then it will be accessible
Last edited by twol; 23-05-19 at 21:07.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Couldn't get the network interface up, so ended up re-flashing it. I can't seem to find a decent skin and download picons. Have gave up for the night and will try again over the weekend.
Is there an IRC channel for OpenVIX ?
Confluence is probably your best bet, skin wise that is.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)