Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
el bandido (31-07-19)
I have gone through most makes and always found the vu to be the best but cost the most to.
I ended up getting the ZGemma H7S with OpenViX and installed my own 2.5" drive. Visually it is very basic, has only a 4 character 7 segment LED display, but so far it has handled everything I have thrown at it! Max load was watching channel locally via HDMI, while recording another (using both sat tuners) and also streaming a recorded programme to my Linux laptop over the LAN, which it deals with no problems.
Wish I could find some documentation on how to configure the front panel, as I want it to display the channel number (currently displays the time) and also use the red LED to indicate that it is recording.
Pretty sure RED / GREEN LED mentions in the H7 manual are typo errors. I pointed this out to Zgemma.
The H7 is basically a newer version of the HD51. The H7 is a top box imo. Low cost, broadcom CPU, internal HDD, fast, stable and well supported. Looks similar to HD51, just reduced in size. Remote is good too.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
cactikid (27-06-19)
I have noticed that the remote control receiver (on the device) is a bit weak. I bought a power strip which detects when I hit the standby button on the remote and turns off the TV and peripherals. The detector for the IR is bluetak-ed on to the top of the Zgemma and it seems to have a MUCH better detection than the Zgemma receiver, anyone experienced this?
Sicilian (07-08-19)