I would run a "make update" and then try an image build again.
I would run a "make update" and then try an image build again.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
I'll try again although I always do that before starting the build.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Failed again with the same error. 288Gb free space.
I may try starting from scratch again later on but got to go out now.
The problem(s) are:
No idea on a solution./home/openvixbuilder/openvix/build-enviroment/builds/openvix/release/u52/tmp/work/u52-oe-linux-gnueabi/qtbase/qtbase-5.9.8+gitAUTOINC+82eb6aa08e-r0/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/8.2.0/ld: .obj/moc_customsqlmodel.o: file not recognized: file truncated
/home/openvixbuilder/openvix/build-enviroment/builds/openvix/release/u52/tmp/work/u52-oe-linux-gnueabi/qtbase/qtbase-5.9.8+gitAUTOINC+82eb6aa08e-r0/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/8.2.0/ld: .obj/moc_stickman.o: file not recognized: file truncated
/home/openvixbuilder/openvix/build-enviroment/builds/openvix/release/u52/tmp/work/u52-oe-linux-gnueabi/qtbase/qtbase-5.9.8+gitAUTOINC+82eb6aa08e-r0/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/8.2.0/ld: .obj/xbelwriter.o: file not recognized: file truncated
/home/openvixbuilder/openvix/build-enviroment/builds/openvix/release/u52/tmp/work/u52-oe-linux-gnueabi/qtbase/qtbase-5.9.8+gitAUTOINC+82eb6aa08e-r0/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/8.2.0/ld: .obj/submarine.o: file not recognized: file truncated
/home/openvixbuilder/openvix/build-enviroment/builds/openvix/release/u52/tmp/work/u52-oe-linux-gnueabi/qtbase/qtbase-5.9.8+gitAUTOINC+82eb6aa08e-r0/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/8.2.0/ld: .obj/moc_window.o: file not recognized: file truncated
/home/openvixbuilder/openvix/build-enviroment/builds/openvix/release/u52/tmp/work/u52-oe-linux-gnueabi/qtbase/qtbase-5.9.8+gitAUTOINC+82eb6aa08e-r0/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/8.2.0/ld: .obj/metainfo.o: file not recognized: file truncated
/home/openvixbuilder/openvix/build-enviroment/builds/openvix/release/u52/tmp/work/u52-oe-linux-gnueabi/qtbase/qtbase-5.9.8+gitAUTOINC+82eb6aa08e-r0/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/8.2.0/ld: .obj/tst_qmetatype.o: file not recognized: file truncated
/home/openvixbuilder/openvix/build-enviroment/builds/openvix/release/u52/tmp/work/u52-oe-linux-gnueabi/qtbase/qtbase-5.9.8+gitAUTOINC+82eb6aa08e-r0/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/8.2.0/ld: .obj/tst_qdbusinterface.o: file not recognized: file truncated
/home/openvixbuilder/openvix/build-enviroment/builds/openvix/release/u52/tmp/work/u52-oe-linux-gnueabi/qtbase/qtbase-5.9.8+gitAUTOINC+82eb6aa08e-r0/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/8.2.0/ld: .obj/tst_qdbusmetatype.o: file not recognized: file truncated
/home/openvixbuilder/openvix/build-enviroment/builds/openvix/release/u52/tmp/work/u52-oe-linux-gnueabi/qtbase/qtbase-5.9.8+gitAUTOINC+82eb6aa08e-r0/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/8.2.0/ld: .obj/main.o: file not recognized: file truncated
/home/openvixbuilder/openvix/build-enviroment/builds/openvix/release/u52/tmp/work/u52-oe-linux-gnueabi/qtbase/qtbase-5.9.8+gitAUTOINC+82eb6aa08e-r0/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi/../../libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/8.2.0/ld: .obj/tst_qimagewriter.o: file not recognized: file truncated
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
Willo3092 (22-01-20)
Still no luck I'm afraid.
I've started from scratch and Mipsel and Arm7 images build fine but the Dinobot 4K+ build still fails with the same error message.
I also tried to build an image for the SF8008 and that also fails with the same error message.
Could it be because they are more modern processors?
I build sf8008 regularly - although on OE-A 4.4 and I am sure Dinobot 4K would build as well (just haven‘t done it for a while)
Maybe the QT source files are corrupted - you should probably delete from your sources file and try again
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Willo3092 (25-01-20)
I'd say the sources are corrupted too. I just built the SF8008 image a few minutes ago without problems.
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
Willo3092 (25-01-20)
I'll give it a go after work, thanks guys
I take it that the Arm7 and Mipsel boxes don't use the qt sources?
Last edited by Willo3092; 25-01-20 at 15:35.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Willo3092 (25-01-20)
To exclude all of the channel settings add the attached file (after unzipping) to meta-local/recipes-local folder. Thanks to captain.
EDIT: Please note change in path from what I had posted earlier
Last edited by abu baniaz; 21-02-20 at 19:21. Reason: correct path
Neat - I just hacked it from the feeds
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
To pre-install some plugins, add the attached file (after unzipping) to meta-local/recipes-local folder. Thanks to Huevos.
Note: Tabs should not be used in bb files
Willo3092 (21-02-20)
Can anyone help with this error?
I get the same error building on OE4.3 and 4.4 and on both ViX and ATV builds.
I've updated to Ubuntu 18.04.4 LTS and started from scratch several times but still the same.
I've also built new sources several times but no luck.
I've googled the error and some have said to omit it from the recipe but I don't know how to do that.
This is the error message and logs are attached:
ERROR: Task (/home/openvixbuilder/VixBuild/build-enviroment/meta-oe-alliance/meta-oe/recipes-extended/astra-sm/astra-sm_0.2.bb:do_compile) failed with exit code '1'
Thanks in advance
I am running 16.04 and GCC 8.3.0.
Make sure your GCC is at least this version.
Also read these 2 pages...Code:openvix@ubuntu01:~$ gcc --version gcc (Ubuntu 8.3.0-16ubuntu3~16.04) 8.3.0 Copyright (C) 2018 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. openvix@ubuntu01:~$
https://askubuntu.com/questions/1028...n-ubuntu-18-04
https://askubuntu.com/questions/2649...-and-g-version
Willo3092 (21-04-20)