So there is an image called PurE2 which 'has it all'.
Any chances we will get MGCamd to support arm receivers as well rather than just OSCam?
So there is an image called PurE2 which 'has it all'.
Any chances we will get MGCamd to support arm receivers as well rather than just OSCam?
Find out what they did to make it work and we will do the same.
EDIT: Link to mgcamd here
https://www.world-of-satellite.com/s...-Arm-receivers
Last edited by abu baniaz; 21-05-19 at 19:49.
xsony_ngux (01-05-19)
The usual answer is to use OScam instead:
Code:https://forums.openpli.org/topic/56702-mgcamd-for-arm-cpu-zero-4k/?view=findpost&p=825086
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
in OpenViX MGcamd ARM can work, it has autonomy for this, but since it is a binary closed code, I do not believe that the OpenViX team is in the job.
mgcamd1.jpg
mgcamd2.jpg
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
norhap (24-04-19)
Last edited by xsony_ngux; 01-05-19 at 01:28.
Osmio4K uses arch64 libs so probably the reason it dosn't work - hd51 is like the other 4K boxes mentioned by Abu as working.
OpenViX Latest Oscam is fine.
The latest greatest versions often are bug fixes and likely to have new bugs based on other software ... so pays to wait a while.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
samsid (02-05-19),xsony_ngux (01-05-19)
Hi
Same here using Ultimo 4k and Mgcamd working with PurE2 6.3 image.
This nthe only image it works with tried loads but only this works.
Thanks
Eggier
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
But all these links to mgcamd are for very old versions. One would want 1.45c (which was made for & works fine on mips)
H7S on Alsat Superior Dark Motor with 80 cm mesh dish, running pure2 v7.3-001
deltec (14-06-19)