Hi
I am unable to find working Mgcamd for Zgemma h7s ipk file
can you help please
EGGMANCAN (19-01-19)
The receiver uses an ARM chip. You will have to use Oscam.
EGGMANCAN (19-01-19)
What softcams do work with ARM chips? Just OSCam and CCcam?Originally Posted by abu baniaz
Last edited by EGGMANCAN; 19-01-19 at 21:50.
Oscam is the mai one to use
CCcam is available, but I found it locks up.
OpenBlackHole had mgcamd, I think it only worked on OpenBlackHole
EGGMANCAN (20-01-19)
The Octagon SF8008 uses a Huawei HiSilicon Hi3798MV200 ARM C/GPU chip. If you have this receiver or a different one with an ARM processor you will not be able to use Mgcamd yet. OSCam and CCcam are available and working (you will need to use CCcam version 2.3.2.).
Last edited by EGGMANCAN; 19-01-19 at 22:38.
seba672 (19-01-19)
Currently CCcam 2.3.0 is installed on OpenViX V5.2. The latest CCcam version is "enigma2-softcams-cccam-all-images_2.3.2-r1_arm-mips_all.ipk" this version is supposed to work with ARM and MIPS processors. Can we have this pre-installed on the latest OpenViX image and can we include it in OpenViX plugin downloads?
As I said in this post the only OSCam that works for me on the ARM Octagon SF8008 is "oscam-latest". Is this the latest and best version of OSCam? This is already included in OpenViX plugin downloads but can we have it pre-installed on the latest OpenViX image?
http://www.openvix.co.uk/index.php/downloads/softcams/ also needs updating.
danlou (09-02-19)
Right now the only way to get MGCamd working with a satellite receiver that has an ARM based processor is to use the PurE2 image from here:Code:http://pur-e2.club/OU/images/index.php?dir=6.2/
Last edited by abu baniaz; 20-01-19 at 01:08. Reason: code links
Links must be coded
Last edited by abu baniaz; 20-01-19 at 01:54.
Arm versions of Mgcamd & Cccam do not work on ViX, thus why they won’t be in the plugin feeds Oscam-Latest is what I use on Arm receivers.
Softcam’s on ViX will never come pre-installed, thus why its optional in the plugin feeds.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
EGGMANCAN (22-01-19)
can we include a check of the box to see if it has an ARM processor or a MIPS processor and only show the corresponding plugins? or add labels to the plugins saying "ARM, MIPS" and display in Softcam Manager if your box is ARM or MIPS? Think about it I setup OpenViX, I install MGCamd from plugins, I put my line in and... nothing. No message, no warning, It just doesn't work. Then I have to come online, scour google to find a thread with the keywords MGCamd and Octagon SF8008 (bear in mind I have no idea that MGCamd does not work with ARM processors). Then find this thread telling me it doesn't work. Nowhere on the box did I get a warning that it wouldn't work and it's the same for OSCam, I download the plugin, install my line and... nothing... then by some random chance I think wait a minute which one of these three OSCams is the latest one? maybe I have installed an old version? so I install Oscam-latest and it works. There was no mention of ARM/MIPS. I was blindly messing about with options and I could of been messing around for hours when a simple pop-up could tell me the issue.
Last edited by EGGMANCAN; 22-01-19 at 12:57.
Don't you think that theres no MGamd or CCcam in OpenViX plugin feeds for the SF8008 would tell you something?
Anymore line talk and I'll be closing this thread.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Andy_Hazza (22-01-19),Willo3092 (22-01-19)
i'm not too sure there are many plugins that no longer work that are still included in the feeds. if you dont remove these no longer working plugins how can i know that you will remove others?
what do you think about the option to include the non-supported MIPS plugins with a notification informing users that they are not supported for this reason? then if an updated version is released the warning just disappears.
Last edited by EGGMANCAN; 22-01-19 at 21:01.
What the hell are you on about. This is the last time I’m gonna explain this to you. Plugins that are c-o-m-p-a-t-i-b-l-e, wether it is for Mips or ARM receivers will be shown. So because for e.g. Mgcamd for ARM DOES NOT work on ViX, it is not available, but because it works for Mips it will be included for Mips boxes. Same with Kodi, if it is available it WILL BE IN the feeds, if it isn’t it won’t be.
Please stop just going on and on and on about nonsense and try and learn.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Please adhere to the forum rules.
I apologise if I have done anything wrong Abu. But everything has already been mentioned in this thread already has it not?
Posting Permissions
Reply With Quote