Rebooting after scanning

[liam23]

Just put OpenVix 5 1 031 on my nano 3t...when I did automatic scan at 99% it crashes and reboots.
So I tried 5.1 030 release and all's well...any ideas why.
Thanks in advance.

[twol]

Crash log???????????????

[liam23]

Where do I look for a crash log....??

[twol]

Whatever is in menu/setup/System/Logs/settings ... log folder location

[Sicilian]

Moved to correct section, as above please post your crashlog.

[liam23]

I have done that and there is absolutely nothing in that folder.

[abu baniaz]

Is the receiver crashing or just restarting.

Can you please confirm what folder you are checking? Thanks.

[liam23]

When scanning (automatic scan) it gets to 99% then a screen comes up telling the the stb needs to reboot with a lot of detail on the page. Then it restarts.
Also, if I apply any skin other than the default skin the box, after a period of time switches itself off and I have to reboot it. Don't know if the two problems are related.
The folder I checked that twol mentioned is menu/setup/System/Logs/settings/home/root

[abu baniaz]

Default one is /home/root/logs/

Please double check and attach thr crash logs here. If you use IPTV, please check them and remove sensitive data

[liam23]

Ok..thank you..this is what I found:

OpenViX Enigma2 Crashlog

Crashdate = Thu Jul 26 12:54:48 2018

Creator = OpenViX
Version = 5.1
Build = 030
Dev = 003
Type = release
Machine = tmnano3t
URL = http://www.world-of-satellite.com
Compiled = Jun 25 2018
Skin = ViX-Night-HD/skin.xml
Component = enigma2, signal

Kernel CMDline = rootfstype=ubifs root=ubi0:rootfs slab_max_order=0 rootflags=sync ubi.mtd=0 rw bmem=192M@64M bmem=256M@512M hwtypenum=17
Nim Sockets = NIM Socket 0:
Type: DVB-S2
Name: BCM7356 (internal)
Has_Outputs: no
Frontend_Device: 0
NIM Socket 1:
Type: DVB-S2
Name: BCM7356 (internal)
Has_Outputs: yes
Frontend_Device: 1
NIM Socket 2:
Type: DVB-C
Name: Panasonic SP9680PVB (external)
Has_Outputs: yes
Frontend_Device: 2
Mode 0: DVB-T



ly scanned
< 1379.515> [eDVBScan] TSID: 082f ONID: 0002
< 1379.515> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11552750, vert, pos 282, sr 22000000, fec 4
< 1379.515> [eDVBScan] try to add sat 282 11552750 22000000 0 4 1
< 1379.515> [eDVBScan] successfully scanned
< 1379.515> [eDVBScan] TSID: 083a ONID: 0002
< 1379.515> [eDVBFrontendParametersSatellite] SAT DVB-S2 freq 11225000, hor, pos 282, sr 23000000, fec 2, modulation 2, rolloff 1, is_id -1, pls_mode 1, pls_code 0
< 1379.515> [eDVBScan] try to add sat 282 11225000 23000000 1 2 2
< 1379.515> [eDVBScan] successfully scanned
< 1379.515> [eDVBScan] TSID: 0817 ONID: 0002
< 1379.515> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11170750, vert, pos 282, sr 22000000, fec 4
< 1379.515> [eDVBScan] try to add sat 282 11170750 22000000 0 4 1
< 1379.515> [eDVBScan] successfully scanned
< 1379.515> [eDVBScan] TSID: 0815 ONID: 0002
< 1379.515> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11141250, vert, pos 282, sr 22000000, fec 4
< 1379.515> [eDVBScan] try to add sat 282 11141250 22000000 0 4 1
< 1379.515> [eDVBScan] successfully scanned
< 1379.515> [eDVBScan] TSID: 082a ONID: 0002
< 1379.515> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11479000, hor, pos 282, sr 22000000, fec 4
< 1379.515> [eDVBScan] try to add sat 282 11479000 22000000 1 4 1
< 1379.515> [eDVBScan] successfully scanned
< 1379.515> [eDVBScan] TSID: 0814 ONID: 0002
< 1379.515> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11126500, hor, pos 282, sr 22000000, fec 4
< 1379.515> [eDVBScan] try to add sat 282 11126500 22000000 1 4 1
< 1379.515> [eDVBScan] successfully scanned
< 1379.515> [eDVBScan] TSID: 07e6 ONID: 0002
< 1379.515> [eDVBFrontendParametersSatellite] SAT DVB-S freq 12129000, hor, pos 282, sr 27500000, fec 2
< 1379.849> [eDVBScan] try to add sat 282 12129000 27500000 1 2 1
< 1379.849> [eDVBScan] successfully scanned
< 1379.849> [eDVBScan] TSID: 07f3 ONID: 0002
< 1379.849> [eDVBFrontendParametersSatellite] SAT DVB-S freq 12382500, vert, pos 282, sr 27500000, fec 4
< 1379.849> [eDVBScan] try to add sat 282 12382500 27500000 0 4 1
< 1379.849> [eDVBScan] successfully scanned
< 1379.849> [eDVBScan] TSID: 083f ONID: 0002
< 1379.849> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11344500, vert, pos 282, sr 27500000, fec 4
< 1379.849> [eDVBScan] try to add sat 282 11344500 27500000 0 4 1
< 1379.849> [eDVBScan] successfully scanned
< 1379.849> [eDVBScan] TSID: 080f ONID: 0002
< 1379.849> [eDVBFrontendParametersSatellite] SAT DVB-S2 freq 11052750, vert, pos 282, sr 23000000, fec 3, modulation 2, rolloff 1, is_id -1, pls_mode 1, pls_code 0
< 1379.849> [eDVBScan] try to add sat 282 11052750 23000000 0 3 2
< 1379.849> [eDVBScan] successfully scanned
< 1379.849> [eDVBScan] TSID: 083c ONID: 0002
< 1379.849> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11265000, hor, pos 282, sr 27500000, fec 2
< 1379.849> [eDVBScan] try to add sat 282 11265000 27500000 1 2 1
< 1379.849> [eDVBScan] successfully scanned
< 1379.849> [eDVBScan] TSID: 0836 ONID: 0002
< 1379.849> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11656000, hor, pos 282, sr 22000000, fec 4
< 1379.849> [eDVBScan] try to add sat 282 11656000 22000000 1 4 1
< 1379.850> [eDVBScan] successfully scanned
< 1379.850> [eDVBScan] TSID: 082c ONID: 0002
< 1379.850> [eDVBFrontendParametersSatellite] SAT DVB-S2 freq 11508500, hor, pos 282, sr 23000000, fec 2, modulation 2, rolloff 1, is_id -1, pls_mode 1, pls_code 0
< 1379.850> [eDVBScan] try to add sat 282 11508500 23000000 1 2 2
< 1379.850> [eDVBScan] successfully scanned
< 1379.850> [eDVBScan] TSID: 0829 ONID: 0002
< 1379.850> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11464250, vert, pos 282, sr 22000000, fec 4
< 1379.850> [eDVBScan] try to add sat 282 11464250 22000000 0 4 1
< 1379.850> [eDVBScan] successfully scanned
< 1379.850> [eDVBScan] TSID: 0834 ONID: 0002
< 1379.850> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11626500, hor, pos 282, sr 22000000, fec 4
< 1379.850> [eDVBScan] try to add sat 282 11626500 22000000 1 4 1
< 1379.850> [eDVBScan] successfully scanned
< 1379.850> [eDVBScan] TSID: 0835 ONID: 0002
< 1379.850> [eDVBFrontendParametersSatellite] SAT DVB-S2 freq 11641500, vert, pos 282, sr 23000000, fec 2, modulation 2, rolloff 1, is_id -1, pls_mode 1, pls_code 0
< 1379.850> [eDVBScan] try to add sat 282 11641500 23000000 0 2 2
< 1379.850> [eDVBScan] scanned but not available
< 1379.850> [eDVBScan] TSID: 082e ONID: 0002
< 1379.850> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11538000, hor, pos 282, sr 22000000, fec 4
< 1379.850> [eDVBScan] try to add sat 282 11538000 22000000 1 4 1
< 1379.850> [eDVBScan] successfully scanned
< 1379.850> [eDVBScan] TSID: 07dd ONID: 0002
< 1379.850> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11953500, vert, pos 282, sr 27500000, fec 2
< 1379.850> [eDVBScan] try to add sat 282 11953500 27500000 0 2 1
< 1379.850> [eDVBScan] successfully scanned
< 1379.850> [eDVBScan] TSID: 082b ONID: 0002
< 1379.850> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11493750, vert, pos 282, sr 22000000, fec 4
< 1379.850> [eDVBScan] try to add sat 282 11493750 22000000 0 4 1
< 1379.850> [eDVBScan] successfully scanned
< 1379.850> [eDVBScan] m_networkid 0 getTableIdExtension 32
< 1379.850> [eDVBScan] TSID: 07f9 ONID: 0002
< 1379.850> [eDVBFrontendParametersSatellite] SAT DVB-S freq 10714000, vert, pos 282, sr 22000000, fec 4
< 1379.851> [eDVBScan] try to add sat 282 10714000 22000000 0 4 1
< 1380.185> [eDVBScan] successfully scanned
< 1380.185> [eDVBScan] TSID: 0809 ONID: 0002
< 1380.185> [eDVBFrontendParametersSatellite] SAT DVB-S freq 10964250, vert, pos 282, sr 22000000, fec 4
< 1380.185> [eDVBScan] try to add sat 282 10964250 22000000 0 4 1
< 1380.185> [eDVBScan] successfully scanned
< 1380.185> [eDVBScan] TSID: 080b ONID: 0002
< 1380.185> [eDVBFrontendParametersSatellite] SAT DVB-S freq 10993750, vert, pos 282, sr 22000000, fec 4
< 1380.185> [eDVBScan] try to add sat 282 10993750 22000000 0 4 1
< 1380.186> [eDVBScan] successfully scanned
< 1380.186> [eDVBScan] TSID: 0801 ONID: 0002
< 1380.186> [eDVBFrontendParametersSatellite] SAT DVB-S2 freq 10832250, vert, pos 282, sr 23000000, fec 3, modulation 2, rolloff 1, is_id -1, pls_mode 1, pls_code 0
< 1380.186> [eDVBScan] try to add sat 282 10832250 23000000 0 3 2
< 1380.186> [eDVBScan] scanned but not available
< 1380.186> [eDVBScan] TSID: 0805 ONID: 0002
< 1380.186> [eDVBFrontendParametersSatellite] SAT DVB-S freq 10891250, vert, pos 282, sr 22000000, fec 4
< 1380.186> [eDVBScan] try to add sat 282 10891250 22000000 0 4 1
< 1380.186> [eDVBScan] successfully scanned
< 1380.186> [eDVBScan] TSID: 0806 ONID: 0002
< 1380.186> [eDVBFrontendParametersSatellite] SAT DVB-S freq 10906000, hor, pos 282, sr 22000000, fec 4
< 1380.186> [eDVBScan] try to add sat 282 10906000 22000000 1 4 1
< 1380.186> [eDVBScan] successfully scanned
< 1380.186> [eDVBScan] TSID: 07fc ONID: 0002
< 1380.186> [eDVBFrontendParametersSatellite] SAT DVB-S freq 10758500, hor, pos 282, sr 22000000, fec 4
< 1380.186> [eDVBScan] try to add sat 282 10758500 22000000 1 4 1
< 1380.186> [eDVBScan] successfully scanned
< 1380.186> [eDVBScan] TSID: 07ef ONID: 0002
< 1380.186> [eDVBFrontendParametersSatellite] SAT DVB-S freq 12304000, vert, pos 282, sr 27500000, fec 4
< 1380.186> [eDVBScan] try to add sat 282 12304000 27500000 0 4 1
< 1380.186> [eDVBScan] successfully scanned
< 1380.186> [eDVBScan] TSID: 0830 ONID: 0002
< 1380.186> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11567500, hor, pos 282, sr 22000000, fec 4
< 1380.186> [eDVBScan] try to add sat 282 11567500 22000000 1 4 1
< 1380.186> [eDVBScan] successfully scanned
< 1380.186> [eDVBScan] TSID: 0840 ONID: 0002
< 1380.186> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11343000, hor, pos 282, sr 27500000, fec 4
< 1380.186> [eDVBScan] try to add sat 282 11343000 27500000 1 4 1
< 1380.186> [eDVBScan] successfully scanned
< 1380.186> [eDVBScan] TSID: 0833 ONID: 0002
< 1380.186> [eDVBFrontendParametersSatellite] SAT DVB-S2 freq 11612000, vert, pos 282, sr 23000000, fec 2, modulation 2, rolloff 1, is_id -1, pls_mode 1, pls_code 0
< 1380.186> [eDVBScan] try to add sat 282 11612000 23000000 0 2 2
< 1380.186> [eDVBScan] successfully scanned
< 1380.186> [eDVBScan] TSID: 0837 ONID: 0002
< 1380.186> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11670750, vert, pos 282, sr 22000000, fec 4
< 1380.186> [eDVBScan] try to add sat 282 11670750 22000000 0 4 1
< 1380.186> [eDVBScan] successfully scanned
< 1380.186> [eDVBScan] TSID: 082d ONID: 0002
< 1380.186> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11523250, vert, pos 282, sr 22000000, fec 4
< 1380.186> [eDVBScan] try to add sat 282 11523250 22000000 0 4 1
< 1380.186> [eDVBScan] successfully scanned
< 1380.187> [eDVBScan] TSID: 0839 ONID: 0002
< 1380.187> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11223500, vert, pos 282, sr 27500000, fec 2
< 1380.187> [eDVBScan] try to add sat 282 11223500 27500000 0 2 1
< 1380.187> [eDVBScan] successfully scanned
< 1380.187> [eDVBScan] TSID: 07fa ONID: 0002
< 1380.187> [eDVBFrontendParametersSatellite] SAT DVB-S freq 10729000, hor, pos 282, sr 22000000, fec 4
< 1380.187> [eDVBScan] try to add sat 282 10729000 22000000 1 4 1
< 1380.521> [eDVBScan] successfully scanned
< 1380.521> [eDVBScan] TSID: 0832 ONID: 0002
< 1380.521> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11597000, hor, pos 282, sr 22000000, fec 4
< 1380.521> [eDVBScan] try to add sat 282 11597000 22000000 1 4 1
< 1380.521> [eDVBScan] successfully scanned
< 1380.521> [eDVBScan] TSID: 0831 ONID: 0002
< 1380.521> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11582250, vert, pos 282, sr 22000000, fec 4
< 1380.521> [eDVBScan] try to add sat 282 11582250 22000000 0 4 1
< 1380.521> [eDVBScan] successfully scanned
< 1380.521> [eDVBScan] TSID: 083d ONID: 0002
< 1380.521> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11307000, vert, pos 282, sr 27500000, fec 4
< 1380.521> [eDVBScan] try to add sat 282 11307000 27500000 0 4 1
< 1380.522> [eDVBScan] successfully scanned
< 1380.522> [eDVBScan] TSID: 083e ONID: 0002
< 1380.522> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11307000, hor, pos 282, sr 27500000, fec 4
< 1380.522> [eDVBScan] try to add sat 282 11307000 27500000 1 4 1
< 1380.522> [eDVBScan] successfully scanned
< 1380.522> [eDVBScan] TSID: 0841 ONID: 0002
< 1380.522> [eDVBFrontendParametersSatellite] SAT DVB-S2 freq 11386500, vert, pos 282, sr 29500000, fec 6, modulation 1, rolloff 0, is_id -1, pls_mode 1, pls_code 0
< 1380.522> [eDVBScan] try to add sat 282 11386500 29500000 0 6 1
< 1380.522> [eDVBScan] successfully scanned
< 1380.522> [eDVBScan] TSID: 080e ONID: 0002
< 1380.522> [eDVBFrontendParametersSatellite] SAT DVB-S freq 11038000, hor, pos 282, sr 22000000, fec 4
< 1380.522> [eDVBScan] try to add sat 282 11038000 22000000 1 4 1
< 1380.522> [eDVBScan] successfully scanned
< 1380.522> [eDVBScan] TSID: 0812 ONID: 0002
< 1380.522> [eDVBFrontendParametersSatellite] SAT DVB-S2 freq 11097000, hor, pos 282, sr 23000000, fec 3, modulation 2, rolloff 1, is_id -1, pls_mode 1, pls_code 0
< 1380.522> [eDVBScan] try to add sat 282 11097000 23000000 1 3 2
< 1380.522> [eDVBScan] successfully scanned
< 1380.522> [eDVBScan] TSID: 0810 ONID: 0002
< 1380.522> [eDVBFrontendParametersSatellite] SAT DVB-S2 freq 11067500, hor, pos 282, sr 23000000, fec 3, modulation 2, rolloff 1, is_id -1, pls_mode 1, pls_code 0
< 1380.522> [eDVBScan] try to add sat 282 11067500 23000000 1 3 2
< 1380.522> [eDVBScan] successfully scanned
< 1380.522> [eDVBScan] channel done!
< 1380.523> [eDVBFrontend] (0)tune
< 1380.523> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
< 1380.523> [eDVBFrontend] prepare_sat System 0 Freq 12522000 Pol 1 SR 30000000 INV 2 FEC 4 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0
< 1380.523> [eDVBFrontend] tuning to 1922 mhz
< 1380.523> [eDVBChannel] OURSTATE: tuning
< 1380.534> [eDVBFrontend] set static current limiting
< 1380.534> [eDVBFrontend] invalidate current switch params
< 1380.534> [eDVBFrontend] setVoltage 1
< 1380.535> [eDVBFrontend] sleep 10ms
< 1380.545> [eDVBFrontend] set sequence pos 3
< 1380.545> [eDVBFrontend] update current switch params
< 1380.545> [eDVBFrontend] startTuneTimeout 5000
< 1380.545> [eDVBFrontend] setFrontend 1
< 1380.545> [eDVBFrontend] setting frontend 0
< 1380.555> [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
< 1380.555> [eDVBFrontend] (0)fe event: status 9, inversion off, m_tuning 2
< 1380.555> [eDVBFrontend] sleep 500ms
< 1381.055> [eDVBFrontend] set dynamic current limiting
< 1385.545> [eDVBChannel] OURSTATE: failed, fatal
< 1385.545> [eDVBFrontend] (0)tune
< 1385.545> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
< 1385.545> [eDVBFrontend] prepare_sat System 1 Freq 12565000 Pol 0 SR 30000000 INV 2 FEC 2 orbpos 282 system 1 modulation 2 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0
< 1385.545> [eDVBFrontend] tuning to 1965 mhz
< 1385.545> [eDVBChannel] OURSTATE: tuning
< 1385.547> [eDVBFrontend] set static current limiting
< 1385.547> [eDVBFrontend] invalidate current switch params
< 1385.548> [eDVBFrontend] setVoltage 2
< 1385.548> [eDVBFrontend] sleep 10ms
< 1385.558> [eDVBFrontend] set sequence pos 3
< 1385.558> [eDVBFrontend] update current switch params
< 1385.558> [eDVBFrontend] startTuneTimeout 5000
< 1385.558> [eDVBFrontend] setFrontend 1
< 1385.558> [eDVBFrontend] setting frontend 0
< 1385.569> [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
< 1385.569> [eDVBFrontend] (0)fe event: status 9, inversion off, m_tuning 2
< 1385.569> [eDVBFrontend] sleep 500ms
< 1386.069> [eDVBFrontend] set dynamic current limiting
< 1390.558> [eDVBChannel] OURSTATE: failed, fatal
< 1390.559> [eDVBScan] no channels left: 76 scanned, 10 unavailable, 76 database.
< 1390.572> [eDVBDB] can't open /etc/enigma2/.../userbouquet.LastScanned.tv: No such file or directory
< 1390.572> [eDVBDB] can't load bouquet userbouquet.LastScanned.tv
< 1390.608> [eDVBDB] Renumbering...
< 1390.608> [eDVBDB] ---- saving lame channel db
< 1390.667> [eDVBDB] saved 76 channels and 1007 services!
< 1390.673> [eComponentScan] scan done!
< 1390.683> [eDVBFrontend] opening frontend 2
< 1390.850> [eDVBChannel] getDemux cap=00
< 1390.850> [eDVBResourceManager] allocate demux cap=00
< 1390.850> [eDVBResourceManager] allocating demux adapter=0, demux=0, source=0 fesource=2
< 1390.850> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 1390.857> [eDVBFrontend] (2)tune
< 1390.858> [eDVBFrontend] tune setting type to 2 from 0
< 1390.858> [eDVBChannel] OURSTATE: tuning
< 1390.867> PC: 7721d4e0
< 1390.867> 00000000 00000001 8beba1e7 00000000
< 1390.867> 0175c098 72235098 00000001 00000001
< 1390.868> 776d0c18 00000000 01870d28 01895d50
< 1390.868> 4843204f 4843204f 32542f54 00690000
< 1390.868> 72235090 0140647c 72235098 0175c098
< 1390.868> 0175c0a0 017fa698 7ffee300 7ffee344
< 1390.868> 00694ba8 7721d4d0 00000000 00000000
< 1390.868> 7798d090 7ffedfd8 7ffee270 00475094
< 1390.902> Backtrace:
< 1390.903> /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x4626AC]
< 1390.903> /usr/lib/libstdc++.so.6(_ZNSt8__detail15_List_node_base7_M_ hookEPS0_) [0x7721D4E2]
< 1390.903> /usr/bin/enigma2(n/a) [0x475094]
< 1390.904> /usr/bin/enigma2(_ZN14eComponentScan9scanEventEi) [0x47453C]
< 1390.904> /usr/bin/enigma2(n/a) [0x49FBA4]
< 1390.904> /usr/bin/enigma2(_ZN8eDVBScan11nextChannelEv) [0x4D6D54]
< 1390.904> /usr/bin/enigma2(_ZN8eDVBScan11stateChangeEP11iDVBChannel) [0x4DA524]
< 1390.905> /usr/bin/enigma2(n/a) [0x49B1B4]
< 1390.905> /usr/bin/enigma2(_ZN11eDVBChannel20frontendStateChangedEP12 iDVBFrontend) [0x497C84]
< 1390.905> /usr/bin/enigma2(n/a) [0x4C574C]
< 1390.905> /usr/bin/enigma2(_ZN12eDVBFrontend7timeoutEv) [0x4C1D50]
< 1390.906> /usr/bin/enigma2(_ZN6eTimer8activateEv) [0x468A08]
< 1390.906> /usr/bin/enigma2(_ZN9eMainloop15processOneEventElPP7_object 9ePyObject) [0x469080]
< 1390.906> -------FATAL SIGNAL (10)


dmesg

<6>scsi0 : ahci_platform
<6>scsi1 : ahci_platform
<6>scsi2 : ahci_platform
<6>ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
<6>ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
<6>ata3: DUMMY
<6>brcmstb_nand: NAND controller driver is loaded
<7>__clk_enable: network [1]
<7>__clk_enable: enet [1]
<7>bcm40nm_pm_genet_enable 00
<2>Found PHY at Address 3
<6>Config GPHY through MDIO
<7>__clk_disable: enet [0]
<7>bcm40nm_pm_genet_disable 00
<7>__clk_disable: network [0]
<7>__clk_enable: network [1]
<7>__clk_enable: moca_genet [1]
<7>bcm40nm_pm_genet1_enable 00
<7>__clk_enable: moca [1]
<7>bcm40nm_pm_moca_enable 00
<6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>ata1.00: ATA-8: TOSHIBA MQ01ABD050V -RH, AX0E3Q, max UDMA/100
<6>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>ata1.00: configured for UDMA/100
<5>scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 AX0E PQ: 0 ANSI: 5
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<3>No PHY detected, not registering interface:1
<7>__clk_disable: moca [0]
<7>bcm40nm_pm_moca_disable 00
<7>__clk_disable: moca_genet [0]
<7>bcm40nm_pm_genet1_disable 00
<7>__clk_disable: network [0]
<4>bcmgenet: probe of bcmgenet.1 failed with error -5
<6>usbcore: registered new interface driver zd1201
<6>usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver dm9601
<6>usbcore: registered new interface driver gl620a
<6>usbcore: registered new interface driver net1080
<6>usbcore: registered new interface driver plusb
<6>usbcore: registered new interface driver cdc_ncm
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>__clk_enable: usb [1]
<7>bcm40nm_pm_usb_enable 00
<6>ehci-brcm ehci-brcm.0: Broadcom STB EHCI
<6>ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
<6>ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
<6> sda: sda1
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<6>ehci-brcm ehci-brcm.0: USB 2.0 started, EHCI 1.00
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<6>ehci-brcm ehci-brcm.1: Broadcom STB EHCI
<6>ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
<6>ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
<6>ehci-brcm ehci-brcm.1: USB 2.0 started, EHCI 1.00
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
<6>ehci-brcm ehci-brcm.2: Broadcom STB EHCI
<6>ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
<6>ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
<6>ehci-brcm ehci-brcm.2: USB 2.0 started, EHCI 1.00
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<6>ehci-brcm ehci-brcm.3: Broadcom STB EHCI
<6>ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
<6>ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
<6>ehci-brcm ehci-brcm.3: USB 2.0 started, EHCI 1.00
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 1 port detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>ohci-brcm ohci-brcm.0: Broadcom STB OHCI
<6>ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
<6>ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
<6>ata2: SATA link down (SStatus 0 SControl 300)
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 1 port detected
<6>ohci-brcm ohci-brcm.1: Broadcom STB OHCI
<6>ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
<6>ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
<6>hub 6-0:1.0: USB hub found
<6>hub 6-0:1.0: 1 port detected
<6>ohci-brcm ohci-brcm.2: Broadcom STB OHCI
<6>ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
<6>ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
<6>hub 7-0:1.0: USB hub foundf
<6>hub 7-0:1.0: 1 port detected
<6>ohci-brcm ohci-brcm.3: Broadcom STB OHCI
<6>ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
<6>ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
<6>hub 8-0:1.0: USB hub found
<6>hub 8-0:1.0: 1 port detected
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>mousedev: PS/2 mouse device common for all mice
<6>i2c /dev entries driver
<6>usbcore: registered new interface driver btusb
<6>hidraw: raw HID events driver (C) Jiri Kosina
<6>usbcore: registered new interface driver usbhid

[liam23]

<6>usbhid: USB HID core driver
<6>TCP: cubic registered
<6>NET: Registered protocol family 17
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>Bluetooth: HIDP socket layer initialized
<5>Key type dns_resolver registered
<6>EBI CS1: setting up NAND flash (primary)
<6>ONFI param page 0 valid
<6>ONFI flash detected
<6>NAND device: Manufacturer ID: 0x01, Chip ID: 0xda (AMD/Spansion S34ML02G1), 256MiB, page size: 2048, OOB size: 64
<6>ONFI param page 0 valid
<6>ONFI flash detected
<6>NAND device: Manufacturer ID: 0x01, Chip ID: 0xda (AMD/Spansion S34ML02G1), 256MiB, page size: 2048, OOB size: 64
<6>brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
<6>
<6>Bad block table found at page 131008, version 0x01
<6>Bad block table found at page 130944, version 0x01
<5>Creating 3 MTD partitions on "brcmnand.0":
<5>0x000000000000-0x00000f500000 : "rootfs"
<5>0x000000000000-0x00000f500000 : "rootfs(redundant)"
<5>0x00000f500000-0x00000ff00000 : "kernel"
<6>EBI CS0: setting up NOR flash
<5>physmap platform flash device: 04000000 at 1c000000
<6>physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
<7>physmap-flash.0: Found an alias at 0x800000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x1800000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x2000000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x2800000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x3000000 for the chip at 0x0
<7>physmap-flash.0: Found an alias at 0x3800000 for the chip at 0x0
<6>Amd/Fujitsu Extended Query Table at 0x0040
<6> Amd/Fujitsu Extended Query version 1.3.
<5>number of CFI chips: 1
<6>PM: CP0 COUNT/COMPARE frequency does not depend on divisor
<5>UBI: attaching mtd0 to ubi0
<5>UBI: scanning is finished
<5>UBI: volume 0 ("rootfs") re-sized from 662 to 1916 LEBs
<5>UBI: attached mtd0 (name "rootfs", size 245 MiB) to ubi0
<5>UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>UBI: good PEBs: 1960, bad PEBs: 0, corrupted PEBs: 0
<5>UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
<5>UBI: max/mean erase counter: 5/3, WL threshold: 4096, image sequence number: 728946571
<5>UBI: available PEBs: 0, total reserved PEBs: 1960, PEBs reserved for bad PEB handling: 40
<5>UBI: background thread "ubi_bgt0d" started, PID 57
<6>ALSA device list:
<6> No soundcards found.
<5>UBIFS: parse sync
<5>UBIFS: background thread "ubifs_bgt0_0" started, PID 58
<5>UBIFS: start fixing up free space
<5>UBIFS: free space fixup complete
<5>UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
<5>UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
<5>UBIFS: FS size: 241889280 bytes (230 MiB, 1905 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
<5>UBIFS: reserved for root: 0 bytes (0 KiB)
<5>UBIFS: media format: w4/r0 (latest is w4/r0), UUID 52777C97-419C-4CB0-AE7D-67B24C71473F, small LPT model
<6>VFS: Mounted root (ubifs filesystem) on device 0:12.
<6>devtmpfs: mounted
<6>Freeing unused kernel memory: 200k freed
<6>EXT4-fs (sda1): recovery complete
<6>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<4>core: module_layout: kernel tainted.
<4>Disabling lock debugging due to kernel taint
<4>[FORCE1]
<4>[Front Version = 138]
<6>input: FORCE1-PLUS remote control (native) as /devices/virtual/input/input0
<4>FORCE1-PLUS Linux DVB BCM73xx CI Driver Release Time (24/05/17)
<4>BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
<4>BKNI_Malloc(linuxkernel) top users:
<4> blocks, bytes, filename:line
<4> 805, 171500, ../BSEAV/lib/utils/balloc.c:35
<4> 495, 33660, ../magnum/basemodules/mem/bmem_system.c:309
<4> 339, 21696, magnum/commonutils/mrc/src/bmrc_monitor.c:979
<6>DVB: registering new adapter (bcmdvb-0)
<6>(NULL device *): DVB: registering adapter 0 frontend 0 (BCM7356 DVB-S2)...
<6>tunercnt 0 name bcmdvb-0 adapter0
<6>DVB: registering new adapter (bcmdvb-1)
<6>(NULL device *): DVB: registering adapter 1 frontend 1 (BCM7356 DVB-S2)...
<6>tunercnt 1 name bcmdvb-1 adapter1
<6>DVB: registering new adapter (bcmdvb-2)
<6>(NULL device *): DVB: registering adapter 2 frontend 2 (SP9680PVB DVB-C/T/T2)...
<6>tunercnt 2 name bcmdvb-2 adapter2
<6>DVB: registering new adapter (bcmdvb-3)
<6>DVB: registering new adapter (bcmdvb-4)
<6>>>>vtuner0: register
<6>DVB: registering new adapter (bcmdvb-5)
<6>DVB: registering new adapter (bcmdvb-6)
<6>DVB: registering new adapter (bcmdvb-7)
<6>DVB: registering new adapter (bcmdvb-8)
<4>Registering device 'sci', major '238'
<4>Version of smartcard driver: [1.0.0]
<4>Process Input : D2 5C EB E5 DE C6 BE 1D 38 3D 8D 3A
<4> Process Output : 7E 87 AA BB B6 F7 48 17 43 65 36 51
<4> @@@ step 3
<4>@@@ : [02]
<4>Data Input : 3A 6E E6 B4 17 7D B0 B9 32 80 21 0E
<4>Data Output : E1 D1 7F 4C 09 B0 4F D9 CA A8 47 65
<6>SGI XFS with security attributes, large block/inode numbers, no debug enabled
<6>NET: Registered protocol family 10
<7>__clk_enable: network [1]
<7>__clk_enable: enet [1]
<7>bcm40nm_pm_genet_enable 00
<6>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>eth0: Link up, 100 Mbps Full Duplex
<6>IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>Undifined lcd ioctl 1015
<4>dolby volume258 set -9000.
<4>dolby volume258 set 0.
<4>dolby volume258 set 0.
<4>dolby volume258 set 0.
<4>dolby volume258 set 0.
<4>- HD_VideoClip out -
<7>__clk_disable: enet [0]
<7>bcm40nm_pm_genet_disable 00
<7>__clk_disable: network [0]
<7>__clk_enable: network [1]
<7>__clk_enable: enet [1]
<7>bcm40nm_pm_genet_enable 00
<4>no vt opened...
<4>path status 0/0
<4>no vt opened...
<4>path status 0/1
<4>no vt opened...
<4>path status 0/2
<4>no vt opened...
<4>path status 0/0
<4>no vt opened...
<4>path status 0/2

[liam23]

Sorry ..had to do it in 2 posts...hope it makes sense..thanks in advance guys.

[abu baniaz]

Thanks.

You could also have attached the file.

[liam23]

Does it make any difference???

[abu baniaz]

Yes. No need for multiple posts. Easier to read in text editor than web browser. Can be sent to other collaborators over Slack/Skype.

Less effort for you too!