Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 1 of 1

Thread: BKP Pappaalfio Basato su BlackHole rev.144 con DLNA

  1. #1
    bassethound's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    May 2010
    Location
    North West
    Posts
    5,719
    Thanks
    6,871
    Thanked 6,130 Times in 2,737 Posts

    BKP Pappaalfio Basato su BlackHole rev.144 con DLNA

    BKP Pappaalfio Basato su BlackHole rev.144 con DLNA



    Configurazione

    Configuration

    Network: 192.168.1.99 subnet 255.255.255.0 DNS already configured
    (These network parameters are for all my BKP)
    User = root Password = voodoo
    Tuner A: Hotbird-Astra Tuner B: A cascade of tuner
    Setting Vhannibal updated on January 22, 2011
    AV HDMI - Config Expert

    Installation

    Unplug all USB devices
    Flashing
    Before restarting, connect the USB devices including DTT (if compatible with the list) and any reader PCSC.

    Network configuration, the DNS are fine ..

    Install any internal HardDisk:
    TastoBlux2> DeviceManager> mountpoint> / media / hdd> Verification (I left out the formatting that should be done only during the new HD)

    Create swap space (useful for backing up):
    as above option swap file settings> Enable button with red> Autostar (yellow button) OK

    Now configure the DTT:
    Key blux2> UsbTunerPanel> selectDrivers> Enable ...
    (May happen that one time is not on, no problem, reboot and repeat the procedure exactly as before, when activated you will see load of files and the green light will go on "Working"

    Channel Search:

    Menu '> Configuration> Channel Search> Configuration Tuner
    C tuner (if not stated is not supported)
    Select OK and the area
    The parameter has no effect on the 5V USB sticks

    With exit back to the submenu> select Manual Scan> Select Tuner C> Complete Search Type> Research Network is> Delete before searching for SI>
    When the search finished, exit

    If you want to use the Plugin SVDownloader that was installed for the first time you use an editor Setting (I use DreamBoxEdit) and downloaded from the Vudu dreamedit setting in, pass the list of land, reorder the list Vhannibal (or else you used ) in the terrestrial digital packages back and forth through the settings on your Vudu so ordered.

    Now you can start reading the SVDownloader VS. configuration, and saved.

    Press the yellow button on the site controlled the premium provider setting and if you need to update, press the download button.
    You will see the list and choose your Bouquets DTT;
    the plugin will connect automatically to the site and download new settings without touching the Bouquet Digital TV.

    At the end of the run command E2 plugin that allows you to avoid restarting E2. (Handy if you consider that the search for terrestrial channels do not do every day).

    A note, with the setting of Vhannibal (do not know the others), the channel numbers of DTT starts from 201 so if you want to call on 1 channel DTT (I assume you have cleared up with Rai 1, you can directly enter the channel in a mnemonic ).

    Plugin

    Font Magnifier
    CCcaminfo
    CccamSwitch
    OscamInfo (new and completely translated into Italian)
    MeteoItalia
    MeoNoot
    UltimeNotizie
    MultiQuickButton (to configure)
    WebInterface New Vudu remote control
    OroscopoItalia
    PicturePlayer
    SVDownloader BY Dalraist
    MediaScanner
    MYTubePlayer

    All plugins installed are working. Other plugins can be downloaded from Repo
    There is also LiveFootball that I forgot to install

    Have already installed the drivers for the PCSC readers.
    In BluPanel (tastoBlux2) you will find the DLNA client and the server that gives you maximum flexibility in the multimedia distribution network.


    Notes


    Panel accessible from script pane scriptPane "(Green + Blue) where you will find all the commands to remove automatically installed and what are some useful system commands.

    Please note that all scripts are automatically started with the selection and therefore require no further confirmation. Special attention to scripts that begin with "Remove"!

    I installed the new plugin that will definitely come back very helpful, in particular, I am sure, is sure to please: Oscam.info.
    I fully translated into Italian, including the guide, then read it before you start using it! (Option from the menu).


    I hope that's enough, good luck!

    thanks Pappaalfio

    Usb

    Code:
    http://rapidshare.com/files/444993241/BKPPappaalfioBH144_balls_USB.rar
    Nfi

    Code:
    http://rapidshare.com/files/444993239/BKP_Pappaalfio_BH144_Balls_nfi.rar
    Attached Images Attached Images
    All PM,s asking about c/s on cable will be ignored and reported to forum staff!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.