Using Tuner B with A not configured works fine. It all works fine in .027 but that should be a workaround for the moment for the OP.
Using Tuner B with A not configured works fine. It all works fine in .027 but that should be a workaround for the moment for the OP.
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
Reason for this on the Solo2 is because it is internally connectable B to A, but not A to B. So Solo2 should always use tuner B as the main option when only one tuner is configured or the box is configured with one tuner as a slave.
Last edited by Huevos; 25-06-18 at 23:02.
That is true that there is an internal loopthrough but in .027 and earlier versions it didn't matter which tuner was configured - it worked.
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
The driver/hardware bug was always there with the Solo2, it is just that this commit shows the bug.
This other commit was added as a workaround for the same bug on a Solo2 some time ago. https://github.com/OpenPLi/enigma2/c...19d0ab55099cb4
Last edited by Huevos; 25-06-18 at 23:27.
OK. thanks for the info.
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
Can affected persons do the following for debugging purposes:
Ensure debug logs are on, GUI restart is required to activate them. We will be restarting at end of next stage, so hold on for this.
In the followoing directory, /usr/lib/enigma2/python/Components
Rename NimManager.pyo to NimManager.pyo.original
Transfer the attached file to /usr/lib/enigma2/python/Components
Leave the ftp client open
Restart the receiver
Go into the tuner config menu
In the followoing directory, /usr/lib/enigma2/python/Components
Ensure you have NimManager.pyo and NimManager.pyo.original (you may need to refresh FTP client)
Delete NimManager.py
Please attach debug log to this thread
Huevos (26-06-18)
Hi
this solution will be released as an update?
Huevos (27-06-18)
harpiks75 (05-07-18)
Hi, I have the same Tuner config menu after factory reset and flashing the latest image to my Gigablue HD Quad plus. My Mutant HD51 is still with the full Tuner config menu.
I tried the debugging and have attached the logs as requested.
regards,
abu baniaz (07-07-18)
This has already been fixed. Update will be in build 031.
Bonus101 (07-07-18),el bandido (08-07-18)