Anyone tested this file, does it fix epg issue
Last edited by Brock92; 04-02-18 at 12:09.
What file? For the makefile yes it should do but we only will know when new images are released with the fix unless one of the beta testers can confirm.Originally Posted by Brock92
If you mean serviceapp IPK I can't test as I have an ARM box, have you tried It?
Sorry I meant the ipk file, I'm not sure how to remove the old file to test it. I will have a look on net to see how it's done and try file then
Sent from my ONE E1003 using Tapatalk
file won't install for me
Sent from my ONE E1003 using Tapatalk
Last edited by Brock92; 04-02-18 at 12:49.
It's from my ViX 5.2 home-build. You can't install it even for mipsel box with ViX 5.1. Sorry for posting it. But it works.
You have to wait for ViX update.
Brock92 (04-02-18)
That would explain it. Thanks
Sent from my ONE E1003 using Tapatalk
I've just updated to the 5.1.014 release and the issue is still there. Did the update fix it for anyone?
Im not sure if the fix got into 5.1.014. Mines still the same.
Last edited by dsayers; 12-02-18 at 15:59.
The change indicated in post #14 is in 5.1.014
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Ok ill try a reflash rather than online update would you think that would effect it?
No idea ( I never use the software update), but if you clean flash then it will verify the fix ... or not.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Re flash worked thanks.
Couch flash worked here too
I personally never do online update as I remember Scillian mentioned once that drivers have changed so a re-flash is needed. This obviously implies that not all files can be updated during an online update. I just re-flash with setting restore (in most cases).
I've submitted a suggestion here to hopefully further improve this by allowing IPTV streams (those mentioned in custommix) to use any service type (ie gstreamer, etc) and not just default option as is case now.
Reinstalling the serviceapp would have been enough.
Posting Permissions
Reply With Quote