Should i be changing that m8, as the router came configured, and would there not be a reason for the router to be set to a 100.100.100.100. ip address rather that a 192 one ??
Should i be changing that m8, as the router came configured, and would there not be a reason for the router to be set to a 100.100.100.100. ip address rather that a 192 one ??
What else can i say !!.....
You can`t please all of the people all of the time...so...dont even try........ ...
Code:http://www.youtube.com/watch?v=dugJTYz-JR4&feature=em-subs_digest
Most dhcp ranges start with either
10
172
Or 192
Netgear router dhcp range is 192,168.1.1 to 192.168.1.254 and you need to change it to this
https://kb.netgear.com/24089/How-do-...ghthawk-router
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
Oh. And make sure you NG router ip is set to 191.168.1.1. Subnet 255.255.255.0
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
So changing the ip on the netgear router won't have any detrimental on the DD-WRT set up,or the VPN set up on the router ???, as i know nothing whatsoever about networking, and i don't want to bulgur up the routers main settings, as the guy who configured the router said,
" the router is no longer running netgear firmware, it runs dd-wrt firmware so netgear software like genie is not compatible "
so i really don't want to bugger anything up, as he would charge me to re-configuer the router, Cheers m8
What else can i say !!.....
You can`t please all of the people all of the time...so...dont even try........ ...
Code:http://www.youtube.com/watch?v=dugJTYz-JR4&feature=em-subs_digest
i posting just so some one reading this in the future dos not get triped up :-)
the 100.100.100.100 is reserverd for use by ISPs as the above it is Private but not normally used on local area networks.......
According to standards set forth in Internet Engineering Task Force (IETF) document RFC-1918, the following IPv4 address ranges have been reserved by the IANA for private internets, and are not publicly routable on the global internet:
10.0.0.0/8 IP addresses: 10.0.0.0 -- 10.255.255.255
172.16.0.0/12 IP addresses: 172.16.0.0 -- 172.31.255.255
192.168.0.0/16 IP addresses: 192.168.0.0 – 192.168.255.255
Note that only a portion of the "172" and the "192" address ranges are designated for private use. The remaining addresses are "public," and routable on the global Internet.
It is important to use caution when setting filters to exclude these private address ranges. In some cases, adjacent address space has been issued by the RIRs to their customers and is in production use.
In August 2012, ARIN began allocating "172" address space to internet service, wireless and content providers. There have been reports from the community that many network operators are denying access to devices having IP addresses from within the entire 172 /8 range. As a result, any device with a 172.x.x.x IP address may have difficulty reaching some sites on the global Internet. The only way to solve this problem is for those operators to reconfigure their router or firewall access control and filter only address space from the 172.16.0.0 /12 range.
IP Location Carrier-grade Nat Rfc6598
Whois Server whois.arin.net
IP Address 100.100.100.100
Last edited by copex; 26-08-17 at 16:41.
What vpn setup do you have?
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
Expressvpn m8
What else can i say !!.....
You can`t please all of the people all of the time...so...dont even try........ ...
Code:http://www.youtube.com/watch?v=dugJTYz-JR4&feature=em-subs_digest
I presume he has set different countries up on the router.
What I can’t figure out is how your router ip is 100.100.100.100.
Can you past a screen shot of you dhcp range. I’ve positive this is your issues.
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
The VPN is south England, but i do see " UNITED STATES " in the wireless basic section ??
What else can i say !!.....
You can`t please all of the people all of the time...so...dont even try........ ...
Code:http://www.youtube.com/watch?v=dugJTYz-JR4&feature=em-subs_digest
So you are trying to log onto one of your boxes Oscam settings using webif.
So you your IP address of the box should be 100.100.100 and anywhere between 2 and 51 (whatever you have set it at)and use the port 8888.
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
Yes ... 100.100.100.xxx:888 will not connect..... went back to the vermin router and it still works ok, but not on the netgear router..??
What else can i say !!.....
You can`t please all of the people all of the time...so...dont even try........ ...
Code:http://www.youtube.com/watch?v=dugJTYz-JR4&feature=em-subs_digest
Is the VPN turned on on the router when you are trying to connect. Try turning it off and see if it connects.
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
ok, turned off the " open vpn client " on my router, rebooted both the router & the mutant, but still getting >>>> 403 Forbidden Access denied.
What else can i say !!.....
You can`t please all of the people all of the time...so...dont even try........ ...
Code:http://www.youtube.com/watch?v=dugJTYz-JR4&feature=em-subs_digest
I can’t think of a setting on the NH that’s can cause this. My bet it’s the ip range that’s causing conflict.
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
Yes m8, it seems to be the 100 ip range..??
What else can i say !!.....
You can`t please all of the people all of the time...so...dont even try........ ...
Code:http://www.youtube.com/watch?v=dugJTYz-JR4&feature=em-subs_digest