Hi all

Recently upgraded to a Vu+ Uno 4K box after I killed my previous box (actually half a pint of water did), I was previously using mgcamd but found out only after purchasing the box that there was no armv7 version that works on OpenVix (although to be honest, I hadn't considered the CPU arch).

Set up OSCam using some config files I found on this forum ( http://www.world-of-satellite.com/sh...l=1#post294116 ), but i'm getting lots of freezing. In fact today it's been freezing every minute or two making it unusable. I've tried a bunch of config changes since then based on reading forum threads, and I've tried the usual re-install of oscam, and restarting it... but nothing helps. I have noticed that if it's a prolonged freeze (they usually last only 2 - 4 seconds, but can last 30+ seconds), then restarting oscam can kick it back into life immediately, but then it will continue freezing anyway.

I checked the logs of OSCam, and noticed that each time it freezes, I get a log entry about ecm not found, followed by a "restarting decodingrequests". Here's a snapshot of the logfile, showing a few of these happening, each one correlated to a freeze on the TV screen.

Code:
2017/05/25 21:22:34 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/04B8/89:0A0C6DD2063A89D2087B1AD105AAC0BA): found (3023 ms) by readerone
2017/05/25 21:22:40 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/28A3/89:7320EF92298A61273886DB69E4E344A1): found (6525 ms) by readerone
2017/05/25 21:22:44 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/04B8/89:2BFBBFD0B16B61C5129DC4BAECB3177E): found (2858 ms) by readerone
2017/05/25 21:22:53 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/28A3/89:9933AC257C6E7EF2757E56F1C326CF70): found (9423 ms) by readerone
2017/05/25 21:22:54 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/04B8/89:055B312DC75CDB4ABB482EED9CFF7E88): found (2820 ms) by readerone
2017/05/25 21:23:03 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/28A3/89:18C6F0EEB891F99389C1791C879343C7): not found (10070 ms) by readerone
2017/05/25 21:23:04 15DE93AC c   (dvbapi) Demuxer 1 restarting decodingrequests after 0 ms with 1 enabled and 1 disabled ecmpids!
2017/05/25 21:23:04 15DE93AC c   (dvbapi) Demuxer 1 trying to descramble PID 0 CAID 1841 PROVID 000000 ECMPID 153E ANY CHID PMTPID 1B5B VPID 0135
2017/05/25 21:23:04 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/04B8/89:2D3F4FD250AA16F7BBE11D4CA266CC77): found (2787 ms) by readerone
2017/05/25 21:23:13 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/28A3/89:9B7F13460BADC365FA7715165157D1CD): found (9553 ms) by readerone
2017/05/25 21:23:13 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/28A3/89:9B7F13460BADC365FA7715165157D1CD): cache2 (8291 ms) by readerone
2017/05/25 21:23:14 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/04B8/89:44D41C46BBA626C079DC5B49798A65C6): found (3132 ms) by readerone
2017/05/25 21:23:23 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/28A3/89:66B16C0A653A0EC3BF9CBC12998B1245): not found (10083 ms) by readerone
2017/05/25 21:23:24 15DE93AC c   (dvbapi) Demuxer 1 restarting decodingrequests after 0 ms with 1 enabled and 1 disabled ecmpids!
2017/05/25 21:23:24 15DE93AC c   (dvbapi) Demuxer 1 trying to descramble PID 0 CAID 1841 PROVID 000000 ECMPID 153E ANY CHID PMTPID 1B5B VPID 0135
2017/05/25 21:23:31 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/04B8/89:4F5074425DCDFBD280D1022F02AFDB46): not found (10115 ms) by readerone
2017/05/25 21:23:32 15DE93AC c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 1 disabled ecmpids!
2017/05/25 21:23:32 15DE93AC c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1841 PROVID 000000 ECMPID 11AB ANY CHID PMTPID 0108 VPID 0321
2017/05/25 21:23:35 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/28A3/89:83077D5A50C383CA708FB409FA326276): found (11563 ms) by readerone
2017/05/25 21:23:35 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/28A3/89:83077D5A50C383CA708FB409FA326276): cache2 (10564 ms) by readerone
2017/05/25 21:23:40 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/04B8/89:D477CF0F1A4211BCCEC5D47ABB3949B5): found (8320 ms) by readerone
2017/05/25 21:23:40 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/04B8/89:D477CF0F1A4211BCCEC5D47ABB3949B5): cache2 (7321 ms) by readerone
2017/05/25 21:23:43 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/28A3/89:D6C577FDBA8AB3EC2D01D5A552F751AC): not found (10127 ms) by readerone
2017/05/25 21:23:44 15DE93AC c   (dvbapi) Demuxer 1 restarting decodingrequests after 0 ms with 1 enabled and 1 disabled ecmpids!
2017/05/25 21:23:44 15DE93AC c   (dvbapi) Demuxer 1 trying to descramble PID 0 CAID 1841 PROVID 000000 ECMPID 153E ANY CHID PMTPID 1B5B VPID 0135
2017/05/25 21:23:45 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/04B8/89:0AD56724FEEB0466FEC422A036B4C557): found (3417 ms) by readerone
2017/05/25 21:23:45 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/28A3/89:3D71DB09D68D35607112C6459B03B792): found (2079 ms) by readerone
2017/05/25 21:23:45 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/28A3/89:3D71DB09D68D35607112C6459B03B792): cache2 (1080 ms) by readerone
2017/05/25 21:23:55 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/04B8/89:EE2CA1F365DE35A270D7FDEABD3CF6D6): found (3534 ms) by readerone
2017/05/25 21:24:01 15DE93AC c      (ecm) dvbapiuser (1841@000000/0000/28A3/89:354ADA465A424EB6E28A32552B36BA79): found (7291 ms) by readerone

Here are the relevant config files with sensitive info redacted

oscam.conf
Code:
[global]
nice = -1
logfile = stdout
preferlocalcards = 1
clienttimeout = 12000
fallbacktimeout = 8000
clientmaxidle = 60
bindwait = 10
netprio = 1

[dvbapi]
enabled = 1
user = dvbapiuser
boxtype = dreambox
au = 1
pmt_mode = 0

[webif]
httpport = 9000
httpuser = 
httppwd = 
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.0.255
oscam.server
Code:
[reader]
label = readerone
protocol = newcamd
device = redacted,redacted
key = 0102030405060708091011121314
user = redacted
password = redacted
disableserverfilter = 1
caid = 1841
ident = 1841:000000
group = 1
audisabled = 1
oscam.user
Code:
[account]
user = dvbapiuser
group = 1
uniq = 0
oscam.dvbapi is empty (well everything is commented out)


Note it's cable, not satellite.

I'm 4 days in, i've exhausted all my google-foo, so i'm really hoping someone can help me.