Hello,
Can someone tell me how do I do a blind scan on ET8500, I was looking thru menus and could not find options aprt form manual scan.Biy was concered that if I do that it may wipe out existing channels.
Hello,
Can someone tell me how do I do a blind scan on ET8500, I was looking thru menus and could not find options aprt form manual scan.Biy was concered that if I do that it may wipe out existing channels.
Do you have sat or cable or both? Not available on Sat.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Clear before scan is defaulted to off. So scans just keep adding services.
I have a saterlite plugin card, so if blind scan is not available how do I scan in certain channels or missing channels?
Or do I just rescan again and set clear to off?
Blind scan: Blindly look at the satellite and add services found. This depends on the binary on the receiver. It is not perfect. My receiver's misses ashed load of transponders.
Manual scan: Look at .xml file and search those frequencies for services, add them to system.
Manual scan has different scan options. You can scan the complete satellite (as per xml file), you can scan a predefined transponder (as per xml file) or you can scan user defined (you enter the values yourself).
Action:
Just select manual scan, select the tuner you want to use, multiple satellite, select satellites you want to scan, and scan
Separate item:
You've not said which satellite. You may not even need to scan, you can use ABM.
Separate item:
Clear before scan just tells receiver to remove the pre-existing services on the frequencies that you scan.
ALIEN1X (24-05-17)
I don't think et8500 supports blindscan.