What is eating my HDD space?

[ljmramst]

Hi all.
If you've seen my other post you'll know I'm struggling with an epg problem.
That means I've not yet used the box for any recordings, apart from one to check that the feature worked.

My other issue is the use of HDD space, I've just clicked on PVR now to check and it stands at 32% remaining. What's happening?
The only way to get it all back is to completely cut power to the box.

It's a 500gb drive, installed at purchase. I followed instructions for initialise and checked in vix / mount manager, it's mounted as: /media/hdd and ext4 R/W.
I set up swap file, menu/setup/vix/swap manager, select media/hdd, create swap file 256 mb. Activate, autostart and exit.

That's all I've done apart from trying to set up my epg's as explained in the other thread.

Elsewhere I've seen suggestions turning off 'timeshift' may cure this, others say not. Still, not an ideal solution and anyway what's going to happen to that space when I do start making recordings?
Any help or suggestions gratefully received, thanks.

[Andy_Hazza]

A swap file on the OS Mega. Seriously? Thats doing more harm than good I tell ya. Best thing to do is start a fresh. Setup as new. And without a SWAP FILE.


Sent from my iPhone using Tapatalk

[birdman]

A swap file on the OS Mega. Seriously? Thats doing more harm than good I tell ya.

How can it do harm?
If you aren't running out of physical memory it won't be used, so won't be a problem. If you are running out of memory then you have a problem anyway.

[ljmramst]

Thanks Andy, as you can probably tell from this and my other thread I'm new to this and trying to learn by following instructions on forums, threads and videos all over the place.
I'm getting close but not quite there yet, appreciate the advice.

[Andy_Hazza]

Just take your time. It will seem daunting but you'll slowly get there. We've all been there. Anything you need to know, just shout up, and we'll try and guide you.


Sent from my iPhone using Tapatalk

[ccs]

I you're familiar with telnet, the command

find /media/hdd -type f -size +50000k -exec ls -lh {} \;

may tell you what's eating up your hdd.

[ccs]

Have you tried yet to find out what is using up disc space?

I you're familiar with telnet, the command

find /media/hdd -type f -size +50000k -exec ls -lh {} \;

may tell you what's eating up your hdd.

(Pressing pause on live tv starts up timeshift, and rebooting will empty the disc space timeshift has used, and recordings use up disc space as well.)

[speedygonzalez]

Have you tried yet to find out what is using up disc space?

(Pressing pause on live tv starts up timeshift, and rebooting will empty the disc space timeshift has used, and recordings use up disc space as well.)

Yes. The list, which may not be exclusive, includes 1) recording programmes, 2) enabling timeshift, and 3) pause even when timeshift is disabled.

I have also tried pointing timeshift to a usb stick instead while it was enabled, which showed me that timeshift files were normal, the issue appears to be that the 3 activities above leave orphan hdd disc space behind, which is invisible to 'ls-a', but is reclaimed by fsck or a restart.

Recording programmes of course use up disc space. The issue is after they are deleted not all the used space is returned, and can only be recovered by fsck or restart. Programme file size looks normal. As an illustration, if free space is 800GB (from menu setup information device), you might find 790GB left after recording a 5GB programme (observed by Filezilla, puttying ls, or the Dream-Explorer plugin), and deleting the programme leaves you with only 795GB free space. You will get the missing 5B back after a restart.

I am speculating, those activities might have used codes that claim hdd disc space (not files, hidden or otherwise, somehow) as workspace, but fail to release the space properly after use.

[birdman]

which is invisible to 'ls-a', but is reclaimed by fsck or a restart.

If it's reclaimed by a restart then something has a (large) file open that has been deleted. The space won't be freed until the file is closed, which will happen on a restart (and in the meantime the process that has it open can still write to it and use more filespace).

You can find open-but-deleted files by running a find command on the box (which I'll work out if you're interested in running it).

[speedygonzalez]

If it's reclaimed by a restart then something has a (large) file open that has been deleted. The space won't be freed until the file is closed, which will happen on a restart (and in the meantime the process that has it open can still write to it and use more filespace).

You can find open-but-deleted files by running a find command on the box (which I'll work out if you're interested in running it).

I agree what you describe sounds like exactly what is happening... I was a unix system administrator decades ago, on a multiuser system that is considerably less powerful than any low-end phone today , so my command of unix/linux is extremely sparse and rusty, to say the least. You are very kind!

[kokojnr]

This seems to be an "initial problem" with EDISION OS MEGA because i had exactly the same issue within a week of my purchase.
It seems like the receiver somehow struggles to correctly read the available HDD space

Sent from my Moto G (4) using Tapatalk

[birdman]

It seems like the receiver somehow struggles to correctly read the available HDD space

If someone could login to the commandline and run "df" to see what that reports it would be helpful then.

And while they're at is running "dmesg" to see whether there are any unusual kernel message would also be useful.

[speedygonzalez]

If someone could login to the commandline and run "df" to see what that reports it would be helpful then.

And while they're at is running "dmesg" to see whether there are any unusual kernel message would also be useful.

I have just done that. The hdd used and free space correspond with what is shown in OpenWebIf.

Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 434.9M 71.2M 363.7M 16% /
devtmpfs 277.5M 4.0K 277.5M 0% /dev
tmpfs 64.0K 0 64.0K 0% /media
tmpfs 277.6M 152.0K 277.5M 0% /var/volatile
/dev/sda1 931.3G 60.5G 869.8G 7% /media/hdd

The sizes found also correspond with what I have reported in the Support thread here (taken from Setup / Information / Devices page's figures), if one accounts for the binary to base 10 conversion, i.e. 1TB expressed as 931.3g.

From dmesg:

root@osmega:/media/hdd# dmesg
Linux version 4.10.0 (vix@ns202814.ovh.net) (gcc version 6.3.0 (GCC) ) #1 SMP Wed Feb 22 16:47:13 CET 2017
CPU0 revision is: 00025a11 (Broadcom BMIPS5000)
FPU revision is: 00130001
MIPS: machine is Broadcom BCM97346DBSMB
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
memory: 20000000 @ 30000000 (usable)
Primary instruction cache 32kB, VIPT, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, VIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
Zone ranges:
Normal [mem 0x0000000000000000-0x000000001fffffff]
HighMem [mem 0x0000000020000000-0x000000004fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x0000000003ffffff]
node 0: [mem 0x0000000030000000-0x000000004fffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x000000004fffffff]
On node 0 totalpages: 147456
free_area_init_node: node 0, pgdat 80a42180, node_mem_map 8100d000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 16384 pages, LIFO batch:3
HighMem zone: 131072 pages, LIFO batch:31
percpu: Embedded 14 pages/cpu @81a10000 s26000 r8192 d23152 u57344
pcpu-alloc: s26000 r8192 d23152 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 146432
Kernel command line: console=ttyS0,115200 ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 568240K/589824K available (8432K kernel code, 331K rwdata, 1680K rodata, 300K init, 294K bss, 21584K reserved, 0K cma-reserved, 524288K highmem)
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:128
irq_bcm7038_l1: registered BCM7038 L1 intc (mem: 0xb0411400, IRQs: 96)
irq_brcmstb_l2: registered L2 intc (mem: 0xb0403000, parent irq: 59)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xb0406780, parent IRQ(s): 2)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xb0408b80, parent IRQ(s): 3)
irq_brcmstb_l2: registered L2 intc (mem: 0xb0408440, parent irq: 61)
irq_brcmstb_l2: registered L2 intc (mem: 0xb0411000, parent irq: 38)
irq_brcmstb_l2: registered L2 intc (mem: 0xb0411d00, parent irq: 39)
clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9544355085 ns
sched_clock: 32 bits at 250 Hz, resolution 4000000ns, wraps every 8589934590000000ns
Console: colour dummy device 80x25
Calibrating delay loop... 1062.91 BogoMIPS (lpj=2125824)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
smp: Bringing up secondary CPUs ...
SMP: Booting CPU1...
Primary instruction cache 32kB, VIPT, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, VIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
CPU1 revision is: 00025a11 (Broadcom BMIPS5000)
FPU revision is: 00130001
Synchronize counters for CPU 1:
done.
SMP: CPU1 is running
smp: Brought up 1 node, 2 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 4, 65536 bytes)
NET: Registered protocol family 16
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
clocksource: Switched to clocksource MIPS
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=18 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.26)
random: fast init done
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
brcm-gisb-arb 10400000.gisb-arb: registered mem: b0400000, irqs: 104, 105
brcm-sata-phy 10180100.sata-phy: registered 2 port(s)
brcmstb-gpio 10406700.gpio: Registered 3 banks (GPIO(s): 0-95)
brcmstb-gpio 10408c00.gpio: Registered 3 banks (GPIO(s): 96-191)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10406900.serial: ttyS0 at MMIO 0x10406900 (irq = 72, base_baud = 5062500) is a 16550A
console [ttyS0] enabled
10406940.serial: ttyS1 at MMIO 0x10406940 (irq = 73, base_baud = 5062500) is a 16550A
10406980.serial: ttyS2 at MMIO 0x10406980 (irq = 74, base_baud = 5062500) is a 16550A
[drm] Initialized
loop: module loaded
brcm-ahci 10181000.sata: controller can't do NCQ, turning off CAP_NCQ
brcm-ahci 10181000.sata: masking port_map 0x3 -> 0x3
brcm-ahci 10181000.sata: SSS flag set, parallel bus scan disabled
brcm-ahci 10181000.sata: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl platform mode
brcm-ahci 10181000.sata: flags: sntf stag pm clo pmp slum part
scsi host0: brcm-ahci
scsi host1: brcm-ahci
scsi host2: brcm-ahci
ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10181a9b] port 0x100 irq 48
ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10181a9b] port 0x180 irq 48
ata3: DUMMY
brcm-ahci 10181000.sata: Broadcom AHCI SATA3 registered
nand: device found, Manufacturer ID: 0x01, Chip ID: 0xdc
nand: AMD/Spansion S34ML04G2
nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
brcmstb_nand 10412800.nand: detected 512MiB total, 128KiB blocks, 2KiB pages, 32B OOB, 8-bit, BCH-4
Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
3 ofpart partitions found on MTD device brcmnand.1
Creating 3 MTD partitions on "brcmnand.1":
0x000000000000-0x000000800000 : "kernel"
0x000000800000-0x000000c00000 : "splash"
0x000000c00000-0x00001fe00000 : "rootfs"
brcmstb_qspi 10410920.spi: using bspi-mspi mode
m25p80 spi32766.0: found mx25l3205d, expected m25p80
m25p80 spi32766.0: mx25l3205d (4096 Kbytes)
3 ofpart partitions found on MTD device spi32766.0
Creating 3 MTD partitions on "spi32766.0":
0x000000000000-0x0000000a0000 : "cfe"
0x0000000a0000-0x0000000b0000 : "nvram"
0x0000000b0000-0x0000000c0000 : "mac"
libphy: Fixed MDIO Bus: probed
bcmgenet 10430000.ethernet: failed to get enet clock
bcmgenet 10430000.ethernet: GENET 2.9 EPHY: 0x00b0
bcmgenet 10430000.ethernet: failed to get enet-wol clock
ata1: SATA link down (SStatus 0 SControl 300)
bcmgenet 10430000.ethernet: failed to get enet-eee clock
libphy: bcmgenet MII bus: probed
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-platform: EHCI generic platform driver
ehci-platform 10480300.usb: EHCI Host Controller
ehci-platform 10480300.usb: new USB bus registered, assigned bus number 1
ehci-platform 10480300.usb: irq 76, io mem 0x10480300
ehci-platform 10480300.usb: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-platform 10480500.usb: EHCI Host Controller
ehci-platform 10480500.usb: new USB bus registered, assigned bus number 2
ehci-platform 10480500.usb: irq 77, io mem 0x10480500
ehci-platform 10480500.usb: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-platform 10490300.usb: EHCI Host Controller
ehci-platform 10490300.usb: new USB bus registered, assigned bus number 3
ehci-platform 10490300.usb: irq 81, io mem 0x10490300
ehci-platform 10490300.usb: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-platform 10490500.usb: EHCI Host Controller
ehci-platform 10490500.usb: new USB bus registered, assigned bus number 4
ehci-platform 10490500.usb: irq 82, io mem 0x10490500
ehci-platform 10490500.usb: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
ohci-platform 10480400.usb: Generic Platform OHCI controller
ohci-platform 10480400.usb: new USB bus registered, assigned bus number 5
ohci-platform 10480400.usb: irq 78, io mem 0x10480400
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-platform 10480600.usb: Generic Platform OHCI controller
ohci-platform 10480600.usb: new USB bus registered, assigned bus number 6
ata2.00: ATA-8: TOSHIBA MQ01ABD100, AX0R2J, max UDMA/100
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/100
ohci-platform 10480600.usb: irq 79, io mem 0x10480600
scsi 1:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 2J PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ohci-platform 10490400.usb: Generic Platform OHCI controller
ohci-platform 10490400.usb: new USB bus registered, assigned bus number 7
ohci-platform 10490400.usb: irq 83, io mem 0x10490400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci-platform 10490600.usb: Generic Platform OHCI controller
ohci-platform 10490600.usb: new USB bus registered, assigned bus number 8
ohci-platform 10490600.usb: irq 84, io mem 0x10490600
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
brcmstb-i2c 10406200.i2c: upg_bsca@97500hz registered in interrupt mode
brcmstb-i2c 10406280.i2c: upg_bscb@97500hz registered in interrupt mode
brcmstb-i2c 10406300.i2c: upg_bscc@97500hz registered in interrupt mode
brcmstb-i2c 10406380.i2c: upg_bscd@97500hz registered in interrupt mode
brcmstb-i2c 10408980.i2c: upg_bsce@97500hz registered in interrupt mode
usbcore: registered new interface driver btusb
bmips-cpufreq: registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-brcmstb 10413500.sdhci: Clock not found in Device Tree
mmc0: SDHCI controller on 10413500.sdhci [10413500.sdhci] using ADMA
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
ubi0: attaching mtd2
mmc0: new high speed SDIO card at address 0001
random: crng init done
ubi0: scanning is finished
ubi0: attached mtd2 (name "rootfs", size 498 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 3984, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 5/3, WL threshold: 4096, image sequence number: 909706988
ubi0: available PEBs: 0, total reserved PEBs: 3984, PEBs reserved for bad PEB handling: 80
ubi0: background thread "ubi_bgt0d" started, PID 79
ALSA device list:
No soundcards found.
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 493809664 bytes (470 MiB, 3889 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID E7473C0E-46D3-4F2F-AD69-F9E4A95D1E77, small LPT model
VFS: Mounted root (ubifs filesystem) readonly on device 0:13.
devtmpfs: mounted
Freeing unused kernel memory: 300K
This architecture does not have kernel memory protection.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ftm4862: loading out-of-tree module taints kernel.
ftm4862: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
dvbdev: DVB: registering new adapter (Broadcom BCM7xxx)
input: dreambox advanced remote control (native) as /devices/virtual/misc/brcmstb/input0
input: dreambox ir mouse as /devices/virtual/misc/brcmstb/input1
input: dreambox front panel as /devices/virtual/misc/brcmstb/input2
misc brcmstb: DVB: registering adapter 0 frontend 0 (Broadcom BCM73XX)...
misc brcmstb: DVB: registering adapter 0 frontend 1 (Broadcom BCM73XX)...
misc brcmstb: DVB: registering adapter 0 frontend 2 (FTM-4862 (Availink AVL6862))...
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
RTL871X: module init start
RTL871X: rtl8723bs v4.4.1_17245.20160325_BTCOEX20151223-654a
RTL871X: build time: Feb 22 2017 16:52:15
RTL871X: rtl8723bs BT-Coex version = BTCOEX20151223-654a
RTL871X: hal_com_config_channel_plan chplan:0x21
RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=e0:b9:4d:9d:6d:b2
RTL871X: module init ret=0
SGI XFS with security attributes, realtime, no debug enabled
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 331
NET: Registered protocol family 10
Segment Routing with IPv6
bcmgenet 10430000.ethernet: configuring instance for external RGMII (no delay)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
bcmgenet 10430000.ethernet eth0: Link is Down
bcmgenet 10430000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
bcmgenet 10430000.ethernet eth0: Link is Up - 10Mbps/Full - flow control rx/tx
bcmgenet 10430000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
root@osmega:/media/hdd#


Cheers!

[1999gtv]

Mine did the same initially I found going into setup/system/storage devices and running filesystem check sorted it eventually.

[ljmramst]

Mine did the same initially I found going into setup/system/storage devices and running filesystem check sorted it eventually.

Tried doing that and I get the message Error:umount: can't unmount/media/hdd: Device or resource busy