Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Will do Andy, but strange how the hdmi worked fine with previous 4k boxes
Edison OS-Mega
Tried the hdmi cable that came with my box yesterday but still I can't set av setting to 2160 so now am stuck not sure what else to try apart from contacting WOS and advising that that may have a sold me a faulty box.
Edison OS-Mega
So go into menu/setup/System/AV settings
Whats pipmode?
Change it (Pip enabled/Pip not enabled with HDR)
REBOOT.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Hi two, Thanks I changed video chip mode to her, 12bit 4:2:0/4:2:2, no pip and restarted then tried to change the mode from 1080 to 2160 and this time it worked it was originally set to pip enabled, no her.
No sure what that setting does but it worked
Edison OS-Mega
It also changes the supported frequency (60/50) as well as pip and hdr mode.
You were probably lucky with the HD51 as the default was also no pip etc until recently...... but the Germans prefer to have PIP and so on both machines it is now the default, which will continue to cause issues for those with 2160 TV's ... and older models. For the HD51 with some Astra 2160 test channels, it is also an issue.
Last edited by twol; 11-03-17 at 10:34.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
maxal (11-03-17)
bought a new receiver, Denon avr-x3300, using this for all HDMI in and 1 out to TV, so it is good for sound AND picture.
Just setting up my new SF4008 to my 1080p Samsung smart TV, I got it preinstalled with OpenVix.
I have no sound on any channels, TV and box volume to max.
I have tried a different HDMI than the issued one too.
Any ideas guys?
Settings/AV AC3 & DTS = Yes????
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Hi twol, i did a bit of research before posting and both AC3 and DTS downmix are selected to yes.
I have it working, i swapped HDMI port on the TV. Very strange, that port worked fine fine for the last 7 years for my DM800.
Coming from the DM800 this box is fantastic!
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Hello !
My LG OLED55B6V works fine in 2160P with all the images I tried (OpenATV, OpenPLI, Blackhole, Open BlackHole...) but in OpenVIX I can only put 1080P !