Ncam openvix

[bassethound]

I find Ncam is more stable than Oscam from feeds and has more flexibility than Oscam which can be found via the Ncam Admin control page via the web browser page

Configs are found in:
Code:

BlackHole - /var/tuxbox/config
Italysat - /var/tuxbox/config
OpenATV - /usr/keys
OpenBlackHole - /var/tuxbox/config
OpenDroid - /usr/keys
OpenNFR - /usr/keys
OpenPLI - /var/tuxbox/config/ncam
OpenSPA - /etc/tuxbox/config
OpenViX - /var/tuxbox/config
RuDream - /var/tuxbox/config
SatDreamGR - /var/tuxbox/config/ncam
VTi - /var/tuxbox/config

[007xico]

I have the attached ipk installed. but where do the config files go? slightly different from openatv.

I was reading and wanted to give Ncam a go but that's the same I have installed and comes up as Oscam 11329 (I have it running).
Am I doing something wrong or the link it's for Oscam.

[DaMacFunkin]

You have to use port 8181 (I think, at work so can't check) it can't be changed.

[john doe]

You have to use port 8181 (I think, at work so can't check) it can't be changed.

your right 8181

[bassethound]

You have to use port 8181 (I think, at work so can't check) it can't be changed.

you can change it to any port you want in ncam.conf mines 8888 just make sure you use a Username and password

[webif]
httpport                      = 8888
httpuser                      = VixUser
httppwd                       = Password
httprefresh                   = 15
httpshowpicons                = 1
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255,1.1.1.1-255.255.255.255 

[tappari]

I find Ncam is more stable than Oscam from feeds and has more flexibility than Oscam which can be found via the Ncam Admin control page via the web browser page

Configs are found in:
Code:

BlackHole - /var/tuxbox/config
Italysat - /var/tuxbox/config
OpenATV - /usr/keys
OpenBlackHole - /var/tuxbox/config
OpenDroid - /usr/keys
OpenNFR - /usr/keys
OpenPLI - /var/tuxbox/config/ncam
OpenSPA - /etc/tuxbox/config
OpenViX - /var/tuxbox/config
RuDream - /var/tuxbox/config
SatDreamGR - /var/tuxbox/config/ncam
VTi - /var/tuxbox/config

What do you mean with more stable than oscam? I have been using oscam for quite many years without problems. Between my boxes I use camd35 protocol.
Any advantage if I go to ncam?

[Andy_Hazza]

What do you mean with more stable than oscam? I have been using oscam for quite many years without problems. Between my boxes I use camd35 protocol.
Any advantage if I go to ncam?

Oscam has been rock solid for me also. I'll be interested to know what bassethound means as more stable.


Sent from my iPhone using Tapatalk

[twol]

I would agree that Oscam has also been rock solid for me.... thought about trying Ncam (something new!) but don,t really see the need .... unless I am missing something?

[bassethound]

Its only my personal opinion that Ncam runs better than Oscam in my setup using multiple readers with fall back readers with out needing regular cam restarts

Ncam will also do steam relay for powervu and will also do tandeburg (obviously I can't go into any details on how it works here google is your friend)

[DaMacFunkin]

you can change it to any port you want in ncam.conf mines 8888 just make sure you use a Username and password

[webif]
httpport                      = 8888
httpuser                      = VixUser
httppwd                       = Password
httprefresh                   = 15
httpshowpicons                = 1
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255,1.1.1.1-255.255.255.255 

When i tried to change mine to 8888 it would originally take me to Oscam config screen, even though Oscam wasn't installed, then after clearing my internet cache chrome on windows 7 would not connect at all and time out. Changing config back to 8181 worked so i left it.

[bassethound]

As I said you can use any port number i use the Ncam Admin Control panel to do any changes using safari on my iPad

[john doe]

I have used both oscam and ncam and both are good, but ncam just sways it for me . I also agree with bassethound, in that oscam sometimes needs restarting, with ncam I've not had to this on openatv and openvix since setting it up. running very smoothly. now considering to put ncam on my other receivers.

need to get 1.4 ncam working but not having it.

[bassethound]

Don't use Ncam 1.4 as this is unofficial release that might steal your date or use your box for bot nets

Just use the official Ncam 1.1 release

[john doe]

Don't use Ncam 1.4 as this is unofficial release that might steal your date or use your box for bot nets

Just use the official Ncam 1.1 release

could never get it to work anyway

[gammgubbe]

I find Ncam is more stable than Oscam from feeds and has more flexibility than Oscam which can be found via the Ncam Admin control page via the web browser page

Configs are found in:
Code:

BlackHole - /var/tuxbox/config
Italysat - /var/tuxbox/config
OpenATV - /usr/keys
OpenBlackHole - /var/tuxbox/config
OpenDroid - /usr/keys
OpenNFR - /usr/keys
OpenPLI - /var/tuxbox/config/ncam
OpenSPA - /etc/tuxbox/config
OpenViX - /var/tuxbox/config
RuDream - /var/tuxbox/config
SatDreamGR - /var/tuxbox/config/ncam
VTi - /var/tuxbox/config

I installed ncam 1.1 (arm7) in my SF4008 with OpenViX. I have ncam config files in /etc/tuxbox/config but ncam overwrites my conf and server files with default values meaning nothing works except biss (which it takes from softcam.key I believe). Why is this behaviour? Now I see you mention config files for OpenViX should be in /var/tuxbox/config, would it make difference?