OSCAM setup issues

[giub1981]

Hi

I have recently purchased a vu ultimo 4k and am having some issues setting up OSCAM. I do have it working but the picture freezes quite often and when I change channel, it can take up to 30 seconds before the channel clears (FTA channels are fine). I was previously using MGCAMD (on the ET10000) and had no issues at all. I can only think that it is my setting that are slightly wrong. This is for cable as dont use sat.

Here are my settings:

OSCAM CONF:


[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = dvbapi
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox

[webif]
httpport = 16001
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1


[reader]
label = slot0
description = freesat
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 0963
fix07 = 0
detect = cd
mhz = 450
cardmhz = 2700
ident = 0963:000000
group = 3
emmcache = 1,3,15,0
dropbadcws = 1
ccchop = 1
auprovid = 000963

[reader]
label = slot1
description = tivusat
protocol = internal
device = /dev/sci1
autospeed = 0
caid = 183D
boxkey = 3737373737373737
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF 6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4 F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD 84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD 86B595B366C35716ABC91FA3DC159C9F4D8164B5
ecmwhitelist = 91
ecmheaderwhitelist = 80308ED387,81308ED387
detect = cd
nagra_read = 1
mhz = 450
cardmhz = 2700
ident = 183D:000000,005411
group = 2
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-g = 1
dropbadcws = 1
ccchop = 1
auprovid = 00183D


OSCAM SERVER:

[reader]
label = Newcamd
protocol = newcamd
device = XXXXX.XXXXXXXX.XXXXX,XXXXX
key = 0102030405060708091011121314
user = XXXXX
password = XXXXXX
group = 1

[reader]
label = Newcamd
protocol = newcamd
device = XXXXX.XXXXXXXX.XXXXX,XXXXX
key = 0102030405060708091011121314
user = XXXXX
password = XXXXXX
group = 2

[reader]
label = Newcamd
protocol = newcamd
device = XXXXX.XXXXXXXX.XXXXX,XXXXX
key = 0102030405060708091011121314
user = XXXXX
password = XXXXXX
group = 3


OSCAM USER:

[account]
user = dvbapi
au = 1
group = 1,2,3

[account]
user = monitor
pwd = monitor
group = 1,2,3


oscam.srvid2: (NOT SURE IF THIS IS NEEDED)


# oscam.srvid2 generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11064 # Read more: http://www.streamboard.tv/svn/oscam/...cam.srvid2.txt



Would someone please be able to check these to see if there is anything obvious that I need to change/delete/add.

Thanks

[tappari]

First take the readers off from oscam.conf. You only need those in oscam.server.

[giub1981]

Ok thanks. Does that mean all my other settings are ok?

[timofee]

The best idea is to get it going then ask any specific questions about what is working and what isn't working.

Your friend is the webif. Bring that up on your PC or tablet and you can see what is happening - it shows you if your cards are starting up correctly.

Also don't ask anything about the readers you have set up - that is outside forum rules.

[giub1981]

Thanks. I really just wanted to know that the other setting were ok (apart from readers) just so I can pin point what the problem may be. I can only imagine it a settings issue as it is working, just glitchy. If anyone can just confirm they are ok or need adjusting, that would be great. Thanks

[timofee]

You need to provide more information about what channels are glitching. If they are channels related to the readers you have set up no one can help.

If the channel is being decrypted by your own card you can copy the log line in your webif to show what is happening. Here is an example of a line that is working correctly with no glitchs.

2017/01/29 22:05:17 48E9F1CC c (ecm) Local (0963@000000/FFFF/132B/71:x:x: found (107 ms) by Card (L/1/6/6)