Autoresolution

[Nitemare]

Hi,
Current image is the OBH 0.6 ULTIMO 4K PRE-RELEASE ...

Issue ... since build update 0.6.23 (which is aligned to the OpenVix build 4.2.023) the Autoresolution plugin no longer appears to work ...

Until that update I had a fully working plugin being able to have 2160P to my 4K TV (default setting in AV of Ultimo 4K) and have my other 1080P TV's could be set to auto change to 1080P by the TV's resolution switching circuitry.

Currently my Autoresolution screen shows the following when enabled ... "Auto Resolution is not working in Scart/DVI-PC Mode" there are NO other lines on the screen.

I realise that the image is PRE-RELEASE but it was working fine prior to this update of image. I've noticed that the OpenVix oe-git log does show that quite a few updates to 3rd party feeds took place and was wondering if this is what's happened??

by-the-by I tested the OpenVTi image and the Autoresolution is still there working fine ... but I prefer the layout of OpenVix/OpenBlackHole Images ...

Has anyone else encountered this?

Is there a solution?

Thanks,
Nitemare

[rossi2000]

Auto-Res is built into the image
no need for a plugin


Enable Autoresolution in AV settings.

[Nitemare]

Auto-Res is built into the image
no need for a plugin


Enable Autoresolution in AV settings.

Yes I tried the "built-in" settings (AV) but they don't meet the demands I require? For some reason each resolution there only gives two options neither of which help me. The autoresolution plugin however, does offer several resolution options per setting and then I can get my desired result.

Thanks.

[rossi2000]

which other options are needed other than the 2 given?
some e.g.:?

[Rob van der Does]

... since build update 0.6.23 (which is aligned to the OpenVix build 4.2.023) the Autoresolution plugin no longer appears to work .......

If that is true that is a bug.
The AR-plugin should work, as it has more options then the build in AR-functionality. And that's intended that way.

[s2tephen]

OBH 0.6 ULTIMO 4K PRE-RELEASE ...

Any chance at trying this pre release.

[Nitemare]

If that is true that is a bug.
The AR-plugin should work, as it has more options then the build in AR-functionality. And that's intended that way.

EXACTLY ... before the issue AR gave you multiple resolutions for each mode .. ie take HD I could have 1080i or 1080p etc but now there is only 1080p 24 or 25 to choose ...
In short AR worked fine in OBH prior to recent online updates ... it must be a bug??

[Nitemare]

If you check out the VTI image for the Ultimo you will see how AR should be. I've set mode to 2160p in AV menu and then in AR I've selected 1080p for every other mode ie SD 25/50 and so on.
So my 4K TV decodes 4K channels in full 2160 and if I switch to a 1080 channel the TV auto switches to 1080p and vice versa.
As stated this worked in OBH image too until recent image updates. I think from 4.2.024 onwards.

[Rob van der Does]

EXACTLY ... before the issue AR gave you multiple resolutions for each mode .. ie take HD I could have 1080i or 1080p etc but now there is only 1080p 24 or 25 to choose ...

Yep, the embedded AR is a mini version of the AR-plugin. It will be sufficient for most people & situations. If not, the AR-plugin is available.

In short AR worked fine in OBH prior to recent online updates ... it must be a bug??

Yep: if the AR plugin doesn't work any more it's a bug. You might try a flash (first without restore, only install AR, you can restore at a later stage).

[Rob van der Does]

I confirm the AR-plugin issue on ViX. I'll file a bug report.
Thanks for reporting.

[Sicilian]

Rob, i'm 99% sure this is down to last release of vu drivers. Nothing to do With image.


Sent from my iPhone using Tapatalk

[Rob van der Does]

Nope, I found the issue to be in this commit:

https://github.com/oe-alliance/enigma2-plugins/commit/1aa8c29b36c1c871321550b0ce4b5347698ce659

When using the plugin.py from before that commit the AR-plugin works fine, also in VU's on ViX-release 4.2.026 (although I can't test 4k boxes, but on others it's fine).

[Nitemare]

I confirm the AR-plugin issue on ViX. I'll file a bug report.
Thanks for reporting.

Thanks Rob (and others) ...
My limited coding knowledge means I rely on people like yourself to keep the images spot on.

Like I said earlier when I tried the VTi image all seems to work perfectly ... I'm not sure how able you and OBH guys are able to use their coding lines in your respective images?

I look forward to any solution being implemented in an update? (pity no VIX image yet to test for the Ultimo 4K )

Cheers,
Nitemare.

When using the plugin.py from before that commit ... any chance of this py file to get me back to previous?

[Rob van der Does]

The issue has been found & fixed, so in next ViX build you can use tha AR-plugin again. Surely BH will take aboard this fix as well.

[Nitemare]

The issue has been found & fixed, so in next ViX build you can use tha AR-plugin again. Surely BH will take aboard this fix as well.

Great news Rob ... yes I'm sure BH guys will follow ...

Thanks again for all coding work ... really appreciated.

Nitemare