Just thought i would share my lcd4linux config seeing as i am bored, it's ok it serves my purpose, i had to do it from scratch as the configs i have for Solo4K and Duo2 would not work.
lcd4config.zip
Just thought i would share my lcd4linux config seeing as i am bored, it's ok it serves my purpose, i had to do it from scratch as the configs i have for Solo4K and Duo2 would not work.
lcd4config.zip
VU+ Ultimo 4K 3TB, 1x Twin DVBS-2 FBC / 1x DVB-C FBC/ 1x Twin DVB-T2.
VU+ Solo4k 2TB, 2xFBC-S2, 2xC/T2, 1x Sundtek .
1m Motorised Single LNB Dish, 60cm Fixed Octo LNB Dish.
Samsung 65HU8500 with SEK-3500, Denon AVR-X2200W 5.1.2.
Oppo UDP-203
Panasonic 55VT50.
Zidoo X9S
Amazon Fire TV 4k & Amazon Fire TV (SPMC sideloaded).
Cheers mate. Just got a duo 2 and this plugin has so many settings don't know where to start! Any chance you could share your duo 2 settings please??? 😉
here is mine : http://www.world-of-satellite.com/sh...linux-vu-duo-2
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
Bangord30 (20-12-16)
Hi mate, there is already a Duo2 lcd4linux thread, i'll post i there.
VU+ Ultimo 4K 3TB, 1x Twin DVBS-2 FBC / 1x DVB-C FBC/ 1x Twin DVB-T2.
VU+ Solo4k 2TB, 2xFBC-S2, 2xC/T2, 1x Sundtek .
1m Motorised Single LNB Dish, 60cm Fixed Octo LNB Dish.
Samsung 65HU8500 with SEK-3500, Denon AVR-X2200W 5.1.2.
Oppo UDP-203
Panasonic 55VT50.
Zidoo X9S
Amazon Fire TV 4k & Amazon Fire TV (SPMC sideloaded).
Bangord30 (20-12-16)
Ps all my config presume your picon location is in flash.
VU+ Ultimo 4K 3TB, 1x Twin DVBS-2 FBC / 1x DVB-C FBC/ 1x Twin DVB-T2.
VU+ Solo4k 2TB, 2xFBC-S2, 2xC/T2, 1x Sundtek .
1m Motorised Single LNB Dish, 60cm Fixed Octo LNB Dish.
Samsung 65HU8500 with SEK-3500, Denon AVR-X2200W 5.1.2.
Oppo UDP-203
Panasonic 55VT50.
Zidoo X9S
Amazon Fire TV 4k & Amazon Fire TV (SPMC sideloaded).
Bangord30 (20-12-16)
Cheers guys!
Just an update on lcd4linux:
I'm now running openVix and was previously running openBH, the version of lcd4linux that OE have in their feeds doesn't seem to have the upgraded support for box-skin-lcd @800x480 Which was introduced into the version of lcd4linux on the Official / VTi / Blackhole feeds shortly after the unit launched, this is what my lcd4linux was created with and if you have created your own in the same vein you will end up in a boot loop when trying to use it with OE images.
I did mention this in the openBH forum last week, and i have seen people commenting on the same problem on the openATV forum, but as of yet the changes haven't been incorporated.
If you swap from Original based image structure to OE image, back up the LCD4linux plug in folder from the original image, install from the feeds on OE image, put enigma2 to sleep with init4, delete the installed LCD4linux folder, copy the new one and chmod the files to 755, now on restart of the machine your config should work properly formatted to the Ultimo4K screen.
VU+ Ultimo 4K 3TB, 1x Twin DVBS-2 FBC / 1x DVB-C FBC/ 1x Twin DVB-T2.
VU+ Solo4k 2TB, 2xFBC-S2, 2xC/T2, 1x Sundtek .
1m Motorised Single LNB Dish, 60cm Fixed Octo LNB Dish.
Samsung 65HU8500 with SEK-3500, Denon AVR-X2200W 5.1.2.
Oppo UDP-203
Panasonic 55VT50.
Zidoo X9S
Amazon Fire TV 4k & Amazon Fire TV (SPMC sideloaded).
Does the other LCD4Linux allow for SNPicons?
Yes it does Abu, it works fine i only have SNP on my system, i tried to recreate my setup using the one in the OE feeds but it does not seem to have the correct size screen for the Ultimo4k, which i suppose is why the one in the official feeds was updated.
VU+ Ultimo 4K 3TB, 1x Twin DVBS-2 FBC / 1x DVB-C FBC/ 1x Twin DVB-T2.
VU+ Solo4k 2TB, 2xFBC-S2, 2xC/T2, 1x Sundtek .
1m Motorised Single LNB Dish, 60cm Fixed Octo LNB Dish.
Samsung 65HU8500 with SEK-3500, Denon AVR-X2200W 5.1.2.
Oppo UDP-203
Panasonic 55VT50.
Zidoo X9S
Amazon Fire TV 4k & Amazon Fire TV (SPMC sideloaded).
abu baniaz (25-01-17)