The channels have downloaded now and all is well, I think, although the message "tune failed" did appear on the screen.
On the box display it shows "A" but not "B". Is that correct? Or should I do a scan for tuner "B" as well.
Last edited by sarntech; 15-08-16 at 19:40.
I'm not sure if the lead to Port B is live. If not, is there a workaround such as a splitter?
Can't use a splitter with traditional satellite LNB/feeds etc.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
sarntech (15-08-16)
OK. Thanks.Originally Posted by Andy_Hazza
Is Port B useless if it is receiving no signal? Or can I set it to do something?
If the lcd display shows A in white and not B then it means A is in use and B is free.
If you select say BBC1 and then go to main menu/Setup/Service searching/Signal finder
Then you can switch between the tuners by selecting tuner and switching between A and B
What does it show??
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
If I switch to B no channels are found.
So if you are on BBC1 and switch to signal finder. Tuner A shows ? and you switch from A to B and B shows no signal?
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
@twol. if you want him to check signal, just get him to out tuner config to simple, single, auto. If it locks, it will return 28.2.
as twin feeds are used for 28.2 you only need 1 good scan for both ,by any chance do you have other tuners fitted in rear of box and you noted the position of A - D?
would an easier way to be hit record on bbc1 then press the up arrow and see if any other channels are available, if all are available, this shows tuner b is avaliable and working?
There are 2 satellite tuners with the leads to ports A and B.
I'll try this later.
If I record BBC1 no other channels are available.
A and B both show as red in the display. (Tune failed shows on TV)
Can tuner B be used for anything? Or do I need to get a satellite signal to it?
Plug your first feed into tuner a. Tryto view a channel. Now remove that feed from tuner a, and plug the othe feed to tuner a. Is it possible to wstch a channel in both cases?
Posting Permissions
Reply With Quote