The mini display is showing the channel details and is flashing "recording". There is no picture on the TV however.
I can get the picture once the recording has finished - I have twin satellite tuners and internal HDD.
Please help
The mini display is showing the channel details and is flashing "recording". There is no picture on the TV however.
I can get the picture once the recording has finished - I have twin satellite tuners and internal HDD.
Please help
Last edited by sarntech; 08-08-16 at 14:09.
This on a 8500? Sorry on my mobile. On both channels? You're definitely on Vix yes lol? There's an ATV similar issue just now
Last edited by Bangord30; 08-08-16 at 14:10.
Yes on 8500 and on Vix.
might be a 1 only supplied feed recordings take first priority over viewing ,other tuners not setup correctly if cables installed?
Bangord30 (08-08-16)
Both tuners set as 28.2 simple and a coax going into each? You played with recording settings? Just leave as standard
not said how many tuners on box or wired up?
Guys on here always recommend standard options. I can't mind them off top of my head. Factory reset would but a bit much I know. Maybe cacti can confirm his.
no dont factory reset ,each tuner setup on 28.2? and using latest cams 1.38 or 2.30?
tuners.jpg
like on C and D
Last edited by cactikid; 08-08-16 at 14:49.
What does the Lcd display show for channels?
White is in use, red recording.... Anot showing then its free tomuse.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K