Remote issue Edision OS MINI 1x DVB-S/S2 Linux Enigma 2 ...

[alcable]

where u get replacements lights on remote dont even work

[Busterroo]

I'm having a similar problem with my remote. I have tried new batteries and still the controls works poorly. I have to have the remote pointing exactly at the right angle and even have it at the same level as the box,which is low to the ground, for it to work. Anyone having the same problems?

I have had the same problem with two of these remotes recently, you have to point them at the floor for them to work. Even installing new quality batteries wont solve this particular fault I'm afraid.

[john doe]

When I first got the box the remote seemed to work fine but after about 3 weeks the signal strength diminished. I put new batteries in but that didn't seem to fix it. I've now had the os mini for a few months and it's gotten to the point where I have to lean out of the chair and have the remote a foot or so off the floor to match the height of where the box is situated to get it to respond and even then I could be pressing the remote 3 or 4 times for it to react. Maybe I'm just unlucky and got a faulty box/remote.

try changing the height of the mini etc. I have a solo remote, which has to be directly in line with the box, even with good batteries. the mini remote is far better and picks up channel change without the remote pointing directly to the box/

[blackvenom]

I've been having similar issues with my OS Mini too. Box unresponsive even though it seems to receive the command from the remote (green light flashes on box when button pressed) and unless the remote is pointed directly at the box, it doesn't pick up the command which is very frustrating.


Sent from my iPhone using Tapatalk

[coolbawn]

Hi, I have just received my edision mini and the remote will not work except close to the box. I have changed the batteries but it is just as bad. The comment about using good quality batteries in other posts does not seem relevant as all my other remotes work perfectly well with all types of batteries. However I did use duracell batteries and it is just the same. It is a remote control that doesnt seem fit for purpose!

[Willmoore]

This has been reported several times. New batteries can solve the problem - if not the other issue is the LED not set correctly. I 'cracked' open an Edision remote yesterday and the LED was pointing downwards. Straightened it and it worked fine. This problem/fix has been discussed several times - Can WOS inform Edision ?