Does Crossepg run a scheduled download once a day when the box is in standby for do you have to leave the box switched on overnight?
Just set a powertimer to wake the box up from deep standby a few minutes before your scheduled task.
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
nibbenjamin (12-04-16)
Guys thanks for above Ive activated powertimer and works for autobouquet but Crossepg does not seem to auto download at requested time (0415) - i have to manually download in order for it to work.
Any ideas?
What receiver do you have?Originally Posted by nibbenjamin
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Edision Mini
How do you have your EPG setup?
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Not sure it that ms the info you were after?
Do me a favour and get rid of the power timer, not needed at all. This is how I want you to setup your EPG. Follow these steps.
1/ Menu > Setup > System > EPG > CrossEPG
a/ Configure > Schedule download = once a day and set a time you want to schedule a time to download. (As a tip do 15mins after ABM scheduled time, so if you have ABM to run at 4am, do CrossEPG to run at 4:15am) Now green button to save.
b/ OpenTV providers > select Sky UK OpenTV and green button to save.
Exit once and go into EPG Settings > set EPG location to either HDD (1st Choice) or USB Flash Drive (2nd Choice) *DO NOT STORE EPG DATA TO INTERNAL FLASH* then green button to save and exit all the way out back to your tv.
2/ Press the blue button, CrossEPG Downloader. This will now populate your 7 day guide. Thats it, all done!! Just put your receiver into Standby mode every night and your scheduled CrossEPG will run just fine. NO NEED FOR THE POWER TIMER, GET RID!!
Regards,
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
John57 (14-04-16),nibbenjamin (13-04-16)
OK Andy - appreciate the help - will try it as you state tonight and let you know
Fingers x'd buddy. Had you done anything different to my recommended settings?OK Andy - appreciate the help - will try it as you state tonight and let you know
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
No that's exactly how I had it set up! How should the initial EPG screen be set up - does this look OK?
No they not right. From EPG location follows these;
hdd
epg
no
no
yes
yes
no
yes
yes
yes
yes
0
yes
yes
Green button to save that and take another pic for me please.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Better?
Posting Permissions
Reply With Quote
