This morning I have successfully flashed a VU Solo 2 with OpenVix 4. I have a Technomate ™-Nano SE that refuses to show the Update screen. Tried both USB ports, reformatted the USB clean and still no update screen. Any ideas!
This morning I have successfully flashed a VU Solo 2 with OpenVix 4. I have a Technomate ™-Nano SE that refuses to show the Update screen. Tried both USB ports, reformatted the USB clean and still no update screen. Any ideas!
Have you tried a different usb < 8gb
VU+ Solo2 HDD Harmony 650 remote
Mutant HD51 4K
VU+ Zero
Edision OS MINI
yes now tried it with a 4gb and a 2gb no luck. thanks for the repliy
Are they a decent make ? I had issues with cheapo ones and now only use Kingston.
VU+ Solo2 HDD Harmony 650 remote
Mutant HD51 4K
VU+ Zero
Edision OS MINI
How many USB devices conncted?
only one USB connected and Kingston USB
Try flashing with Image Manager
I've had one stuck before you could try a factory reset first then as Abu says try a different image like openatv via image manager, i got it working but I do remember it being tricky.
How do you get the image to be seen on a usb?
If you have an external hdd or any other usb's connected, disconnect them, only flash with the one usb which has your image on.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
where do I get the image from?