Last edited by twol; 20-02-16 at 17:08.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Sorry I should have said I had a debug log and a crash log. I have managed to force a debug log and will post it on edit of this post. 2 ticks.
https://drive.google.com/file/d/0B4G...ew?usp=sharing
1_0_1_128F_7EA_2_11A0000_0_0_0.jpg
Last edited by Mini-Me; 20-02-16 at 17:20.
Last edited by abu baniaz; 20-02-16 at 17:13. Reason: logs appeared
Sorry for the confusion. I understand the difference between the logs, I just wasn't too clear on that...
I did carry out a full reboot not a GUI reboot.
I have attached a log and screenshots in in my previous post. http://www.world-of-satellite.com/sh...l=1#post392486
Thanks for your patience.
Last edited by Mini-Me; 20-02-16 at 17:36.
As an aside, you should use CCcam 2.30 if using multi-tuner receivers. Ever since the heartbleed issue and SSL changes, this has been the case.
Mini-Me (20-02-16)
I did read about that. Consider it installed.
Have you timeshift running?
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Yes timeshift is running after 20 seconds.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Tried with timeshift disabled. No different. I may swap out the hard drive and try a different one. Last resort I suppose.
I have never had a problem with my ET10k recording and never the problem that you are having, and i have a 3TB 3.5" Toshiba Drive in mine and also in my Duo2 and every program records perfect and how they are supposed to, how have you got it set up in Recording and Playback settings here is a snapshot of my settings so you can compare them against yours
ET10k Recording Settings 1.jpg ET10k Recording Settings 2.jpg
Mini-Me (22-02-16)
Hi all,
Just swapped out the hdd and installed a 300gb wd blue 2.5" hdd to test. I recorded a 30min program and found that it played back OK. Looks as though the old hdd is fubar'd, possible bad sectors or a failing component.
I'm currently scanning channels and bouquets and will try one more recording soon. I hope it is just a faulty hdd.
Thanks for all the assistance so far.
@nsw9154, I'll check my settings against yours once the scan is sorted.
Cheers
abu baniaz (22-02-16)
@nsw9154... my settings are the same as yours.
glad you sorted it mate and it looks like a faulty Hard Drive and not a faulty ET10k
abu baniaz (22-02-16),Mini-Me (22-02-16)