Hi guys,
Im need of help, Ive just the stupidest thing and tried to update the firmware to the latest build having not updated for a while. Now after following the instructions... loaded the new flash it hangs...
any ideas?
i have openvix screen up on the Tv but thats it.
Last edited by xcase; 02-02-16 at 19:14. Reason: spelling
How did you update? Try doing a fresh flash via usb stick to see if that helps.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
tried via USB and tried loadedOriginally Posted by Andy_Hazza
Openvix 3 2 036 Release Gbquad Usb
were you using a good usb stick like kingston 8gb ?
Hi,
Did you update the bootloader? If not, trying doing that as there is newer bootloader available. Same procedure as updating the image.
GAH
yeh 16GB kingston
Flash boot loader first then flash latest Vix and all will be good.
Flash boot loader same as you would an image
Posting Permissions
Reply With Quote