Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 17

Thread: ETx8000 and slingplayer remote

  1. #1
    Tryharder

    ETx8000 and slingplayer remote

    I have just upgraded from an et900 to an et8000 but I have found the remote control for the et900 cannot control the et8000....the problem I have is that the same thing applies to my slingplayer virtual remote on my Laptop. It no longer controls my Slingbox....I have tried a Dreambox vitual remote and a VU virtual remote but none seem to work...Has anyone any clues to what I can do...

    Rgds.Tryharder

  2. #2
    bluepassat's Avatar
    Title
    Senior Member
    Join Date
    Mar 2013
    Posts
    145
    Thanks
    71
    Thanked 39 Times in 30 Posts
    did the xtrend et8000 not come with a remote?

    I have a harmony 650 it controls all my devices in 1 unit

    might be worth a look

    regards

    blue
    Xtrend ET8000 Latest Openvix Image
    Fire TV Stick side loaded Kodi
    Xtrend ET8500 Latest Openvix Image 4.2
    Apple TV silver Openelec
    HTPC Windows 7 Kodi

  3. #3
    Tryharder
    Thanks for the reply blue. But the point I am saying is that i have a slingbox which i can control via my laptop via slingplayer which uses a VIRTUAL remote but the one i currently use is for my previous box an et900 and it won't control the et8000.

    It just so happens that the ACTUAL remote for the et900 doesn't work on the et8000 either( but this is irrelevent to my needs, just a point I was making )

    Rgds.Tryharder

  4. #4
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,422
    Thanks
    997
    Thanked 2,894 Times in 2,247 Posts
    SO out of the 1000's of remotes it says it supports, slingbox doesn,t have a virtual remote for the Xtrend ET7500/8000/8500/10000 range which use similar remotes?
    Last edited by twol; 25-01-16 at 18:19.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  5. #5
    Tryharder
    Nope...Unless anyone Knows different. I beleive you can custom one but you need a bin.file and despite searching all afternoon I haven't found one.

    Rgds. Tryharder

  6. #6
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,422
    Thanks
    997
    Thanked 2,894 Times in 2,247 Posts
    Setup/input devices/configure remote control type. Chnage to ET9000
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  7. The Following User Says Thank You to twol For This Useful Post:

    Bangord30 (25-01-16)

  8. #7
    Tryharder
    Quote Originally Posted by twol View Post
    Setup/input devices/configure remote control type. Chnage to ET9000
    No Good Mate...Thanks anyway
    I need a bin.file to custom a remote....Ive managed to find this one for the ET10000....V2010_PL.BIN...but no joy

    Rgds.Tryharder

  9. #8
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,422
    Thanks
    997
    Thanked 2,894 Times in 2,247 Posts
    Quote Originally Posted by Tryharder View Post
    No Good Mate...Thanks anyway
    I need a bin.file to custom a remote....Ive managed to find this one for the ET10000....V2010_PL.BIN...but no joy

    Rgds.Tryharder
    Why doesn't changing the remote for the ET10000 to a ET9000 work?
    If it supports the ET9000 remote then surely the virtual remote will work?
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  10. #9
    Tryharder
    Quote Originally Posted by twol View Post
    Why doesn't changing the remote for the ET10000 to a ET9000 work?
    If it supports the ET9000 remote then surely the virtual remote will work?
    It doesnt support either...I can't remember (It was 5yrs ago when i got it) how i got the remote for my etx900 it must have been Customised with a working bin.file...The remotes for Xtrend Boxes aren't on the list of supported boxes...I found a bin.file for the ET10000 but that doesnt work either..So im looking for one that will actualy work with the ET8000..

    Rgds.Tryharder

  11. #10
    ccs's Avatar
    Title
    ViX Beta Tester
    Join Date
    Sep 2014
    Posts
    5,836
    Thanks
    554
    Thanked 1,277 Times in 1,089 Posts
    I think the idea is to change the remote control type on the new et8000 to be an et9000.

    "menu/setup/system/input devices/configure remote control type" on your et8000.

    Doesn't the et8000 allow you to do this?

  12. #11
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,422
    Thanks
    997
    Thanked 2,894 Times in 2,247 Posts
    Yep thats what I am trying to communicate ...... But obviously very poorly that way the EXISTing et9000 slingbox virtual remote should/must ? work with the et8000 Vix system with the remote changed.
    Certainly my ViX et8500 supports the whole range of Xtrend remotes so the ET8000/10000 will as well
    Last edited by twol; 26-01-16 at 18:23.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  13. #12
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,422
    Thanks
    997
    Thanked 2,894 Times in 2,247 Posts
    Having had a whisky tot, thought I would try again.
    1. continue to use the virtual remote you have working.
    2. change the remote for the et8000 to the same remote type by going into Vix as described above.
    3. now you are using the same virtual remote and physical remote

    Should work .... Yes?
    Last edited by twol; 26-01-16 at 18:45.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  14. #13
    Tryharder
    First of all apologies...I was making the adjustments on the Slingbox NOT the ET8000....Ive followed your instructions on the Sat,Box but still no Joy with the virtual remote in Slingplayer....Sorry again but we have been at cross purposes...But I'm not the sharpest tool in the box. I shall continue my quest,,!!!

    Rgds. Tryharder

  15. #14
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,422
    Thanks
    997
    Thanked 2,894 Times in 2,247 Posts
    No problem .... But still not sure why it doesn,t work as the code in ViX should emulate the different remote correctly for at least the majority of the keys.
    E.g. My wetek can be controlled by Xtrend , mut@ nt and at least 6 other remotes.

    Anyway hope you reach a solution
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  16. #15
    Tryharder
    Sorted...( not sure how ) But thanks to all that helped.

    Rgds. Tryharder

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.