HDMI CEC - not working right.

[imish]

will report back once I give it a try.

[Valiant]

Obviously there is an issue - either with the hardware (Miracle box) else with the software (Openvix).

would appreciate it is someone can help troubleshoot - I am available to collect any relevant logs if guided.

imish, I also have a Miracle Box running OpenVix as per my signature.

My Miracle Box HDMI CEC setup page looks like this : -

HDMI CEC Setup.jpg

and my Hisense TV HDMI setup page looks like this : -

IMG_0579.jpg

This setup enables me to control the TV and MB power on/off simultaneously with a single press of the MB remote power button. The TV sound level and the selected TV channel are also controlled with the remote similarly. The Hisense can be set to detect the MB, in my case on HDMI3, a function probably not present in older or less "smart" TVs.

I have since set my Harmony One up as my remote - means the numbers are under my thumb and not 6 inches away. The Harmony remote allows you to create an activity in which the remote software sends relevant commands to more than one device synchronising, for example, the power, volume, and channel select functions on them.

[chaser]

I have a VU+ box connected to a Panasonic TV via a Panasonic Surround Sound box. I could never get the VU+ box to switch the TV to the correct HDMI input, so I ended up using the Hotel Mode to force the TV into HDMI mode on power up. I always found the best way to get everything working reliably was to start the system up by powering up the TV with the VU+ remote, and let the TV send the wakeup signals to the surround sound and VU+ boxes. Similarly, power everything down by using the VU+ remote to initially switch off the TV. I now have a similar setup using a LG TV - albeit the LG TV will power back up into HDMI mode without needing any silly Hotel Mode setup.

[imish]

I have a VU+ box connected to a Panasonic TV via a Panasonic Surround Sound box. I could never get the VU+ box to switch the TV to the correct HDMI input, so I ended up using the Hotel Mode to force the TV into HDMI mode on power up. I always found the best way to get everything working reliably was to start the system up by powering up the TV with the VU+ remote, and let the TV send the wakeup signals to the surround sound and VU+ boxes. Similarly, power everything down by using the VU+ remote to initially switch off the TV. I now have a similar setup using a LG TV - albeit the LG TV will power back up into HDMI mode without needing any silly Hotel Mode setup.

Good suggestion however didn't work for me - despite switching the TV into Hotel mode it still wouldn't switch to HDMI1 (STB)....

vey frustrating that we are struggling to get such a basic feature going.

[twol]

Good suggestion however didn't work for me - despite switching the TV into Hotel mode it still wouldn't switch to HDMI1 (STB)....

vey frustrating that we are struggling to get such a basic feature going.

Sorry, but go back into Hotel mode and just check that it is set to hdmi1 ... I have done this with 3 Panasonics over the last 10 years and it has always worked.

[imish]

TV switches to HDMI1 in Hotel mode perfectly fine > Only when not connected to the STB. As soon as I connect the STB it doesn't switch.

[nekrub2]

For years the Panasonic Hotel mode worked perfectly well. Now however, the TV switches on but does not change to HDMI1 anymore. I verified the hotel mode is on. The same also from my DVD Recorder, TV does not switch to HDMI2. My suspicion is, that something is odd in the TV. Panasonic TX-32LX80LXD80F.
Sat box VU+ Solo2 Openvix 6.3.003.

Any advice?

[ronand]

It looks like the TV is the problem. Turn off HDMI-CEC on the TV. Power it off at the mains for a minute or so (completely remove power). Power it back on and enable HDMI-CEC.

[twol]

For years the Panasonic Hotel mode worked perfectly well. Now however, the TV switches on but does not change to HDMI1 anymore. I verified the hotel mode is on. The same also from my DVD Recorder, TV does not switch to HDMI2. My suspicion is, that something is odd in the TV. Panasonic TX-32LX80LXD80F.
Sat box VU+ Solo2 Openvix 6.3.003.

Any advice?

Hotel mode still working on my Panny plasma, so I would assume its the TV failing for some reason

[nekrub2]

Switched off Vieralink on TV. As a result, the sat box does not switch off / on the TV. Quick fix.: Leave the TV on HDMI1 (SAT) input and switch off the power line of the TV. When switching on the power again it starts on the sat input. So I just have to start the sat box.