oscam converter

[jap]

ive just recieved my new 4k looks impressive. my question after i convert cccam to oscam can i use doscam.cfg to put in reciever

[mann]

ive just recieved my new 4k looks impressive. my question after i convert cccam to oscam can i use doscam.cfg to put in reciever

install correct image Oscam cam on box and reboot..if using vix image ensure oscam cam is compatible with vix image.
Using ccam converter convert your info to Oscam "server file" and save to where you can find it.
Then FTP your new saved Oscam server config file to etc/tuxbox/config folder you should have 4 files in there and replace the default Oscam.server file..Then exit ftp and reboot box..make sure cam is running and all should be good..

[jap]

Thanks mann will have a go later

[jdseasider81]

Cheers will try now if there are two parts to my information am I right in thinking I can do it at same time

[jdseasider81]

I have only 3

Oscam. Conf
Oscam.srvid
Oscam.user

[judge]

oscam.conf is the only file you need to get oscam working, all other files can be created as needed by its WebIF.

[kegnkiwi]

Look in the file oscam.conf and it will let you know the webif port number. Then type you box's ip address into your computers browser followed by ort number no gaps. example 192.1680.250:8888 this will take you into the oscam webif. From the tabs at the top select files and then oscam.server or oscam.user, put in what you need and save.

[tappari]

I have only 3

Oscam. Conf
Oscam.srvid
Oscam.user

It seems you miss file oscam.server. That is the file to define from where your card is readed. Eather from boxes local smartcard readers or from your another box. Readers from local box can be like this:
[reader]
label = mycard
protocol = internal
device = /dev/sci0
detect = cd
group = 1
emmcache = 1,3,15
deprecated = 1

[reader]
label = mycard
protocol = internal
device = /dev/sci1
detect = cd
group = 2
emmcache = 1,3,15
deprecated = 1

[jdseasider81]

ok i am in the webif bit now, starting to get giddy as i can see the light at the end of the tunnel. My information is not just for 1 area but a large continent. does this affect the help you have given me so far

[jdseasider81]

no good,not on

[jap]

i cant get anything clearing either i used the converter andput in to oscam.server using ftp in Dcc and saved and exit started oscam-pcsc-latest from softcam setup it said active but still nothing.in my tuxbox/config folder i have 5 files oscam.ccache oscam.conf oscam.server oscam.user oscam.srvid2 is this correct and should i do anything in the other filesother than oscam.server. This has my head wrecked

[neil306]

i cant get anything clearing either i used the converter andput in to oscam.server using ftp in Dcc and saved and exit started oscam-pcsc-latest from softcam setup it said active but still nothing.in my tuxbox/config folder i have 5 files oscam.ccache oscam.conf oscam.server oscam.user oscam.srvid2 is this correct and should i do anything in the other filesother than oscam.server. This has my head wrecked

you need to use oscam-latest..... not oscam-pcsc-latest .....oscam-pcsc is for omnikey readers if you are reading a card

[DaMacFunkin]

Not true, both should work fine.

[jap]

well am i doing everything correct so far and if i am is their any apparent why its not clearing

[DaMacFunkin]

Cable or satellite?