Help on cccam and oscam pls.

[bellejt]

maybe it is easyer to do it another way if you can FTP to the box.Go into box by FTP and copy the files in oscam to your PC .Then remove the files on the box and ftp new files to box.Should work.
PS : for finding the right port to open Webif from oscam go into config file on your box and see witch port is used.Use the RIGHT mouse button to go into file

[lorlor]

Am really grateful guys, l managed to do it but the problem is, is freezing every 8sec at time freezed to the extent that l had to change the channel. Plz what can l do.

[lorlor]

One more think l cant access webif by out network.

[lorlor]

Oscam 1.1/enigma2/openvix3.2 freezing every 8sec, freezing to the extent that l had to change the channel. Plz what can l do. One more thing,l cant access webif by outer network.

[DaMacFunkin]

You shouldn't be starting a new thread really should you, you already have a thread with these issues in.

[lorlor]

Well,no respond that is why.

[DaMacFunkin]

Hello you have been told that oscam webif is your boxes IP address followed by a port, this port is in your config file, my port is set to 8888 so I would type into an explorer address bar :
192.168.1.181:8888
This would then ask me for my username and password which I had previously set in the config file.
If you havnt set the config file up yourself your port might not be 8888, you need to find this information from the config file, without you accessing oscam webif we can't help with your time outs.

[kegnkiwi]

If you using an official card and getting freezing them you need the change the settings in oscam, if you not using an official card then really this forum is not the correct place to discuss you problems. If its not an official card check you internet connection, change cams and try cccam and see if it persists.

[lorlor]

ls not the issue,l accessed it before and wanted to access it again but saying This webpage is not available.

[johnhoe]

OK make sure there is a [webif] section in oscam.conf. If there isn't then add these lines

[webif]
httpport = 8888
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpforcesslv3 = 1
httppollrefresh = 10

[abu baniaz]

Are you still pursuing this? I have alos merged your three threads about more or less the same issue?
http://www.world-of-satellite.com/sh...cam-cccam-help

[DaMacFunkin]

Well,no respond that is why.

Dude honestly.... I had to take a 44 tonne truck out today coz a driver didn't turn in, Most people are not on the end of a device all day long just to provide support, I spent most of Saturday trying to sort my own s**t out, when I am available if I can answer a question I will, but that is certainly never whilst driving an HGV through busy streets and villages.
As it is when you get into oscam webif you need to change the timeout in global config, if you are accessing your local cable card set it to 8000ms, i personally have mine set to 10000ms.
If it is sat you will need much lower values but that all depends on what card you have.

[twol]

.

Dude honestly.... I had to take a 44 tonne truck out today coz a driver didn't turn in, Most people are not on the end of a device all day long just to provide support, I spent most of Saturday trying to sort my own s**t out, when I am available if I can answer a question I will, but that is certainly never whilst driving an HGV through busy streets and villages.
As it is when you get into oscam webif you need to change the timeout in global config, if you are accessing your local cable card set it to 8000ms, i personally have mine set to 10000ms.
If it is sat you will need much lower values but that all depends on what card you have.

.... If you are driving 44 tonne trucks.... I had better set myself a note to never upset you .... Mind you when you live in a country where normally a truck has a trailer at least as big as the vehicle in front you get used to avoidance techniques

[lorlor]

No,

[lorlor]

Are you still pursuing this? I have alos merged your three threads about more or less the same issue?
http://www.world-of-satellite.com/sh...cam-cccam-help

No