But l just want to use it as client. Bcuz u mention reader and webif but l dont know how to configure them more so l dont have card on my box l mean smart card and smart cam.
But l just want to use it as client. Bcuz u mention reader and webif but l dont know how to configure them more so l dont have card on my box l mean smart card and smart cam.
then story ends because CS may not be discussed on forum
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
lorlor (10-11-15)
Thank you.
Right before you hang yourself in a street with no trees, why don't you remove anything that can identify you and your system from the files in tuxbox/config and then zip them up and post them, maybe some kind sole will have a look and give you some pointers.
Remember no illegal stuff, we won't help with that.
VU+ Ultimo 4K 3TB, 1x Twin DVBS-2 FBC / 1x DVB-C FBC/ 1x Twin DVB-T2.
VU+ Solo4k 2TB, 2xFBC-S2, 2xC/T2, 1x Sundtek .
1m Motorised Single LNB Dish, 60cm Fixed Octo LNB Dish.
Samsung 65HU8500 with SEK-3500, Denon AVR-X2200W 5.1.2.
Oppo UDP-203
Panasonic 55VT50.
Zidoo X9S
Amazon Fire TV 4k & Amazon Fire TV (SPMC sideloaded).
these are what in my tuxbox/config config.zip
hello l have attached my tuxbox/config file.
first thing I see is teh extention .txt. If the files are in the box like that it will never work.Extention txt is wrong.
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
l attached another
Pls l have attached another one.
Add a [dvbapi] section to the .conf file.
Do this using the webif, and go to each config file in turn and save it using the webif command -- that corrects small errors.
pls how can l add it bcuz l ftp it but not transfer.
l dont know how to use webif,how can l use it with command.
hello any clue or help...........pls dont ignore.
You enter the Ip address of your receiver combined with ":" and the defined port number for oscam into your browser. The port number is specified in your oscam.conf
If your IP receiver's IP address is 192.168.0.6, you would enter the following into your web browser (Internet Explorer, Firefox etc)
192.168.0.6:8888
l dont know what to addd to [dvbapi] section to the .conf file. Pls help me.