4.8e and 0.8w tuners not available

[Naz]

Using a vu solo2 with latest vix image and a motor dish. 2 weeks ago 4.8e and 0.8w the channel were not in white in my fav list. They was grey I cud not select the channel. So I have done a complete flash and when I go on satellites and click on 0.8w or 4.8e it says service unavailable check tuner config. This has never happened before I've had these channels for the last 3 years wot do i do. It was fine till I did the vix update to build 010 . I reflashed to the new update 015 and it's the same

[Andy_Hazza]

If you had searched the forum you would have seen this post. Here goes; http://www.world-of-satellite.com/sh...ad.php?t=48496


Sent from my iPhone using Tapatalk

[timofee]

Easiest solution is to edit two lines in the new satellites.xml file.

Change
<sat name="1.0W Thor 5/6/7 &amp; Intelsat 10-02" flags="0" position="-10">
to
<sat name="1.0W Thor 5/6/7 &amp; Intelsat 10-02" flags="0" position="-8">

and change
<sat name="5.0E Astra 4A &amp; SES 5" flags="0" position="50">
to
<sat name="5.0E Astra 4A &amp; SES 5" flags="0" position="48">

[Huevos]

Easiest solution is to edit two lines in the new satellites.xml file.

Change
<sat name="1.0W Thor 5/6/7 & Intelsat 10-02" flags="0" position="-10">
to
<sat name="1.0W Thor 5/6/7 & Intelsat 10-02" flags="0" position="-8">

and change
<sat name="5.0E Astra 4A & SES 5" flags="0" position="50">
to
<sat name="5.0E Astra 4A & SES 5" flags="0" position="48">

Not a good idea. This file changed for a reason. If you do that the new ABM providers (Viasat and Canal Digital Nordic) won't work properly. Nor will network scanning.

[Rob van der Does]

And if you change the file, never do it in etc/tuxbox, as that's a system file that we keep up-to-date. It will be overwritten during an online image update.
You're free to use your personal file in etc/enigma2; that will be part of the settings back up. But before you do, read what Huevos told you.